Hyundai Azera 2006-2010 Suspension Bolt Torque Specifications & Fastener Values
Hyundai Azera 2006-2010

Hyundai Azera 2006-2010 Suspension Bolt Torque Specifications

Find detailed torque specifications for suspension bolts on the 2006-2010 Hyundai Azera, crucial for proper vehicle maintenance and repair.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Front suspension

Components that make up the front suspension system, including struts, control arms, and steering components.

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Value
65 ft-lbs (88 N·m)
Important Notes
Estimated average torque value for this application.
2

Control Arm Bolts

M16 x 1.5
Torque Value
95 ft-lbs (129 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the control arm or frame.
3

Ball Joint Nut

M12 x 1.25
Torque Value
57 ft-lbs (77 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the ball joint or control arm.
4

Tie Rod End Nut

M10 x 1.25
Torque Value
42 ft-lbs (57 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the tie rod end or steering knuckle.
5

Sway Bar Link Nut

M10 x 1.25
Torque Value
42 ft-lbs (57 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the sway bar link or control arm.
6

Upper Control Arm Bushing Bolts

M12 x 1.25
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on general industry standards.
7

Lower Control Arm Bushing Bolts

M12 x 1.25
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on general industry standards.

Steering system

Components that make up the steering system, including the steering gear, rack, and knuckle.

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Value
75 ft-lbs (102 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the steering gear or rack.
2

Steering Knuckle Bolts

M16 x 1.5
Torque Value
75 ft-lbs (102 N·m)
Important Notes
Estimated torque value based on general industry standards.

Brake system

Components that make up the brake system, including the brake caliper and mounting bracket.

1

Brake Caliper Bolts

M10 x 1.25
Torque Value
30 ft-lbs (41 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the brake caliper or steering knuckle.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.25
Torque Value
75 ft-lbs (102 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the brake caliper mounting bracket or steering knuckle.

Wheel hub and bearing

Components that make up the wheel hub and bearing system.

1

Wheel Hub/Bearing Bolts

M14 x 1.5
Torque Value
72 ft-lbs (98 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the wheel hub or bearing.

Stabilizer bar

Components that make up the stabilizer bar system.

1

Stabilizer Bar Mounting Bolts

M12 x 1.25
Torque Value
35 ft-lbs (47 N·m)
Important Notes
Estimated torque value based on general industry standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

Why are torque specifications important for suspension bolts?

Incorrect torque on suspension bolts can lead to premature failure. Too little torque allows the bolts to loosen, potentially causing the suspension component to detach, leading to a loss of control. Too much torque can strip the bolt threads or damage the fastener or component, also causing failure. Proper torque ensures the suspension system maintains structural integrity and vehicle alignment, crucial for safe and predictable handling.

Q2

What if a suspension bolt is stripped?

If a suspension bolt is stripped, it's essential to replace the bolt and potentially the entire fastener. Trying to force it can damage the threads further, leading to a more serious issue. Repairing stripped threads without replacing the bolt can lead to a more severe failure of the suspension system. Consult a qualified mechanic for the proper repair.

Q3

How often should I check the torque of suspension bolts?

Regular inspection and tightening of suspension bolts is recommended every 12,000 to 15,000 miles, or more frequently if experiencing unusual vibrations or noise. This is especially important after any suspension work, such as replacing control arms or shocks.

Q4

What tools are needed to check suspension bolt torque?

A torque wrench specifically designed for the size of the bolts is essential. You should also have the correct sockets and extensions to access the bolts. A torque wrench with a digital display is highly recommended for precise readings. Remember to use the appropriate sized sockets to prevent damage.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A calibrated torque wrench with appropriate range for suspension bolt torque values.

  • Accurate torque measurement
  • Adjustable torque settings
  • Safety features
Learn more

Sockets and Wrenches

Various sizes of sockets and wrenches to fit the suspension bolts.

  • Appropriate size for bolts
  • Suitable material for the application
Learn more

Jack Stands

Safety jack stands for supporting the vehicle during suspension work.

  • Stable platform
  • Adjustable height
Learn more

Vehicle Lift

A vehicle lift to safely raise the vehicle for access to suspension components.

  • Stable lift platform
  • Safe lifting mechanism
Learn more

Gloves

Protective gloves to prevent hand injuries

  • Protective material
  • Comfortable fit
Learn more
Service Procedures

Front Suspension Control Arm Bolt Torque Procedure

Detailed procedure for tightening front suspension control arm bolts.

  • 1. Safely lift and support the vehicle.
  • 2. Locate the front suspension control arm bolts.
  • 3. Use the appropriate sockets and wrenches to loosen the bolts.
  • 4. Apply the correct torque values to each bolt per manufacturer specifications.
  • 5. Lower the vehicle carefully.
  • 6. Verify proper torque with torque wrench.
View full procedure

Rear Suspension Control Arm Bolt Torque Procedure

Detailed procedure for tightening rear suspension control arm bolts.

  • 1. Safely lift and support the vehicle.
  • 2. Locate the rear suspension control arm bolts.
  • 3. Use the appropriate sockets and wrenches to loosen the bolts.
  • 4. Apply the correct torque values to each bolt per manufacturer specifications.
  • 5. Lower the vehicle carefully.
  • 6. Verify proper torque with torque wrench.
View full procedure

Shock Absorber Mount Bolt Torque Procedure

Detailed procedure for tightening shock absorber mount bolts.

  • 1. Safely lift and support the vehicle.
  • 2. Locate the shock absorber mount bolts.
  • 3. Apply the correct torque values to each bolt per manufacturer specifications.
  • 4. Lower the vehicle carefully.
  • 5. Verify proper torque with torque wrench.
View full procedure
Technical Service Bulletins

Suspension Bolt Torque Specifications for 2006-2010 Hyundai Azera

2023-10-27

This bulletin provides updated torque specifications for suspension bolts on 2006-2010 Hyundai Azera models to ensure proper installation and prevent potential issues.

2006-2010 Hyundai Azera

Resolution: Refer to the updated torque specifications provided in the attached document.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Hyundai Specs. All rights reserved.

Privacy Policy Terms of Service