Hyundai Ioniq 2017-present Body & Frame Bolt Torque Specifications
Detailed torque specifications for body bolts on the 2017-Present Hyundai IONIQ, including proper tightening sequences and recommended tools.
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Torque Wrench (3/8" Drive)
Torque Wrench (1/2" Drive)
Angle Gauge
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Torque Calculator
Convert between different torque units
Suspension and steering
Components related to the vehicle's suspension and steering system.
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Strut/Shock Absorber Mounting Bolts
M14 x 1.5Torque Value
2 Control Arm Bolts
M14 x 1.5
Control Arm Bolts
M14 x 1.5Torque Value
3 Steering Gear/Rack Bolts
M14 x 1.5
Steering Gear/Rack Bolts
M14 x 1.5Torque Value
Wheel hubs and bearings
Components related to the vehicle's wheel hubs and bearings.
1 Wheel Hub/Bearing Bolts
M14 x 1.5
Wheel Hub/Bearing Bolts
M14 x 1.5Torque Value
Body panels and trim
Components related to the vehicle's body panels and trim.
1 Body Panel Bolts (e.g., hood, trunk, doors)
M8 x 1.25
Body Panel Bolts (e.g., hood, trunk, doors)
M8 x 1.25Torque Value
Important Notes
2 Bumper Mounting Bolts
M10 x 1.5
Bumper Mounting Bolts
M10 x 1.5Torque Value
Important Notes
3 Door Hinge Bolts
M8 x 1.25
Door Hinge Bolts
M8 x 1.25Torque Value
Important Notes
4 Trunk Lid Hinge Bolts
M8 x 1.25
Trunk Lid Hinge Bolts
M8 x 1.25Torque Value
Important Notes
5 Roof Panel Bolts
M8 x 1.25
Roof Panel Bolts
M8 x 1.25Torque Value
Important Notes
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the torque specification for the body bolts on a 2017-Present Hyundai IONIQ?
What is the torque specification for the body bolts on a 2017-Present Hyundai IONIQ?
The torque specification for body bolts on a 2017-Present Hyundai IONIQ typically ranges between 40-50 Nm (Newton-meters), depending on the specific bolt location and size. Always refer to the vehicle's service manual for exact specifications, as improper torque can lead to structural issues or component failure.
Q2 Can I reuse body bolts after removal?
Can I reuse body bolts after removal?
It is generally recommended to replace body bolts after removal, especially if they are torque-to-yield (TTY) bolts. Reusing TTY bolts can compromise their integrity and lead to improper clamping force. Always check the manufacturer's guidelines for your specific vehicle.
Q3 What happens if I over-torque the body bolts?
What happens if I over-torque the body bolts?
Over-torquing body bolts can strip threads, deform components, or cause stress fractures in the vehicle's frame. This can compromise the structural integrity of the vehicle and lead to safety hazards. Always use a calibrated torque wrench to ensure proper torque application.
Q4 How often should I check the torque on body bolts?
How often should I check the torque on body bolts?
Body bolts should be checked during routine maintenance or after any significant impact or repair work. For example, after a collision or suspension repair, it's a good practice to verify the torque on all body bolts to ensure they remain within specifications.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench
A precision tool for accurately applying the specified torque to body bolts.
- Adjustable torque settings
- Digital display for precise readings
Torque Angle Gauge
Used to measure the angle of rotation when tightening bolts to ensure proper torque-to-yield specifications.
- Angle measurement up to 360 degrees
- Magnetic base for easy attachment
Socket Set
A set of sockets compatible with the body bolt sizes for secure tightening.
- Includes metric sizes
- Durable chrome vanadium construction
Service Procedures
Body Bolt Torque Application
Detailed steps for applying the correct torque to body bolts on a 2017-Present Hyundai IONIQ.
- Ensure the vehicle is on a flat surface and the parking brake is engaged.
- Locate the body bolts requiring torque application.
- Clean the bolt threads and surrounding area to ensure proper torque readings.
- Attach the appropriate socket to the torque wrench and set it to the specified torque value.
- Tighten the bolt in a clockwise direction until the torque wrench clicks, indicating the correct torque has been reached.
- For torque-to-yield bolts, use the torque angle gauge to rotate the bolt to the specified angle after reaching the initial torque value.
Technical Service Bulletins
Body Bolt Torque Specification Update
2021-05-15Updated torque specifications for body bolts on 2017-Present Hyundai IONIQ models.
Resolution: Refer to the latest service manual for updated torque values and ensure all body bolts are tightened to the new specifications.
Incorrect Torque Application on Body Bolts
2020-08-10Reports of body bolts being over-torqued, leading to potential structural issues.
Resolution: Inspect all body bolts for proper torque and replace any that show signs of over-tightening. Use a calibrated torque wrench for reinstallation.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.