Hyundai Ioniq 2017-present Electric Engine Bolt Torque Specifications
Detailed torque specifications for the electric engine bolts of the 2017-Present Hyundai IONIQ. Includes tightening sequences, torque values, and recommended tools.
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Torque Wrench (3/8" Drive)
Torque Wrench (1/2" Drive)
Angle Gauge
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Torque Calculator
Convert between different torque units
Electric motor
Components related to the electric motor, including mounting, cooling, power electronics, and shaft bolts.
1 Electric Motor Mounting Bolts
M12 x 1.5
Electric Motor Mounting Bolts
M12 x 1.5Torque Value
Important Notes
2 Electric Motor Cooling System Bolts
M10 x 1.25
Electric Motor Cooling System Bolts
M10 x 1.25Torque Value
Important Notes
3 Electric Motor Power Electronics Bolts
M8 x 1.25
Electric Motor Power Electronics Bolts
M8 x 1.25Torque Value
Important Notes
4 Electric Motor Shaft Bolts
M16 x 1.5
Electric Motor Shaft Bolts
M16 x 1.5Torque Value
Important Notes
Battery pack
Components related to the battery pack, including mounting and cooling system bolts.
1 Battery Pack Mounting Bolts
M12 x 1.5
Battery Pack Mounting Bolts
M12 x 1.5Torque Value
Important Notes
2 Battery Pack Cooling System Bolts
M10 x 1.25
Battery Pack Cooling System Bolts
M10 x 1.25Torque Value
Important Notes
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the recommended torque specification for the electric engine mounting bolts on a 2017-Present Hyundai IONIQ?
What is the recommended torque specification for the electric engine mounting bolts on a 2017-Present Hyundai IONIQ?
The recommended torque specification for the electric engine mounting bolts is typically between 70-90 Nm (Newton-meters). However, always refer to the official Hyundai service manual for the exact specifications, as they may vary depending on the specific model year and configuration.
Q2 How often should I check the torque on the electric engine bolts?
How often should I check the torque on the electric engine bolts?
It is recommended to check the torque on the electric engine bolts during routine maintenance intervals, such as every 30,000 miles or as specified in your vehicle's maintenance schedule. Additionally, inspect the bolts after any significant impact or vibration that could affect their tightness.
Q3 Can I use a standard torque wrench for tightening electric engine bolts?
Can I use a standard torque wrench for tightening electric engine bolts?
Yes, a standard torque wrench can be used, but ensure it is calibrated and capable of measuring the required torque range (70-90 Nm). Using a torque wrench ensures proper tightening and prevents over-torquing, which could damage the bolts or engine components.
Q4 What happens if the electric engine bolts are not torqued correctly?
What happens if the electric engine bolts are not torqued correctly?
Incorrect torque can lead to several issues, including loose bolts causing vibrations, misalignment of the engine, or even damage to the engine mounts. Over-torquing can strip threads or crack components, while under-torquing may result in bolts loosening over time.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench
A precision tool for applying accurate torque to electric-engine bolts.
- Adjustable torque settings
- Digital display for precise readings
Torque Angle Gauge
Used to measure the angle of rotation when applying torque to bolts.
- Angle measurement up to 360 degrees
- Magnetic base for easy attachment
Electric-Engine Bolt Socket Set
A specialized socket set designed for electric-engine bolts.
- Includes sizes specific to Hyundai IONIQ electric-engine bolts
- Durable construction for repeated use
Service Procedures
Electric-Engine Bolt Torque Application
Detailed steps for applying the correct torque to electric-engine bolts on a 2017-Present Hyundai IONIQ.
- Ensure the vehicle is powered off and the battery is disconnected.
- Identify the specific bolts requiring torque application as per the service manual.
- Set the digital torque wrench to the specified torque value (refer to the service manual).
- Apply torque to each bolt in a crisscross pattern to ensure even distribution.
- Use the torque angle gauge to verify the angle of rotation for bolts requiring angle torque.
- Recheck all bolts to ensure they meet the specified torque and angle requirements.
Technical Service Bulletins
Electric-Engine Bolt Torque Specification Update
2021-05-15Updated torque specifications for electric-engine bolts on 2017-Present Hyundai IONIQ models.
Resolution: Refer to the updated torque specifications in the service manual and ensure all bolts are torqued to the new values.
Incorrect Torque Application on Electric-Engine Bolts
2022-08-10Reports of improper torque application leading to bolt loosening in electric-engine systems.
Resolution: Follow the updated service procedure for torque application and use a calibrated torque wrench to ensure accuracy.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.