Hyundai Palisade 2020-present Body & Frame Bolt Torque Specifications
Detailed torque specifications for body bolts on the 2020-Present Hyundai Palisade, including recommended tightening sequences and torque values for various components.
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Torque Wrench (3/8" Drive)
Torque Wrench (1/2" Drive)
Angle Gauge
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Torque Calculator
Convert between different torque units
Suspension System
The suspension system consists of components that connect the vehicle's body to the wheels, ensuring proper alignment, stability, and smooth movement.
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Strut/Shock Absorber Mounting Bolts
M14 x 1.5Torque Value
Important Notes
2 Control Arm Bolts
M16 x 1.5
Control Arm Bolts
M16 x 1.5Torque Value
Important Notes
3 Ball Joint Nut
M12 x 1.25
Ball Joint Nut
M12 x 1.25Torque Value
Important Notes
4 Tie Rod End Nut
M10 x 1.25
Tie Rod End Nut
M10 x 1.25Torque Value
Important Notes
5 Sway Bar Link Nut
M8 x 1.25
Sway Bar Link Nut
M8 x 1.25Torque Value
Important Notes
Body Mounts
The body mounts secure the vehicle's body to the frame, ensuring proper body alignment and stability.
1 Body Mount Bolts
M12 x 1.5
Body Mount Bolts
M12 x 1.5Torque Value
Important Notes
Door And Hood Hinges
The door and hood hinges attach to the vehicle's body, ensuring proper door and hood alignment and smooth operation.
1 Door Hinge Bolts
M8 x 1.25
Door Hinge Bolts
M8 x 1.25Torque Value
Important Notes
2 Hood Hinge Bolts
M8 x 1.25
Hood Hinge Bolts
M8 x 1.25Torque Value
Important Notes
3 Trunk Lid Hinge Bolts
M8 x 1.25
Trunk Lid Hinge Bolts
M8 x 1.25Torque Value
Important Notes
Bumper Mounts
The bumper mounts secure the bumpers to the vehicle's body, maintaining proper bumper alignment and stability.
1 Bumper Mounting Bolts
M10 x 1.25
Bumper Mounting Bolts
M10 x 1.25Torque Value
Important Notes
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the torque specification for the body bolts on a 2020-Present Hyundai Palisade?
What is the torque specification for the body bolts on a 2020-Present Hyundai Palisade?
The torque specification for body bolts on a 2020-Present Hyundai Palisade typically ranges between 40-50 Nm (29-37 ft-lbs), depending on the specific bolt location. Always refer to the vehicle's service manual for exact specifications, as improper torque can lead to structural issues or component failure.
Q2 Can I reuse body bolts after removal?
Can I reuse body bolts after removal?
It is generally not recommended to reuse body bolts, as they are often designed as torque-to-yield (TTY) bolts. These bolts stretch during installation and may lose their clamping force if reused. Always replace body bolts with new ones to ensure proper torque and structural integrity.
Q3 What happens if I over-torque the body bolts?
What happens if I over-torque the body bolts?
Over-torquing body bolts can lead to thread stripping, bolt failure, or damage to the vehicle's frame. This can compromise the structural integrity of the vehicle and may result in costly repairs. Always use a calibrated torque wrench and follow the manufacturer's specifications.
Q4 How often should body bolts be checked for proper torque?
How often should body bolts be checked for proper torque?
Body bolts should be checked for proper torque during routine maintenance or after any significant impact or repair work. If you notice unusual noises, vibrations, or misalignment, inspect the body bolts immediately to ensure they are properly torqued.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench
A precision tool for applying accurate torque to body bolts.
- Adjustable torque settings
- Digital display for precise readings
Torque Angle Gauge
Used to measure the angle of rotation when tightening bolts.
- Magnetic base for easy attachment
- Clear angle markings
Socket Set
A set of sockets compatible with body bolt sizes.
- Includes both metric and standard sizes
- Durable construction
Service Procedures
Body Bolt Torque Application
Detailed steps for applying the correct torque to body bolts on a 2020-Present Hyundai Palisade.
- Ensure the vehicle is on a flat surface and the parking brake is engaged.
- Locate the body bolts requiring torque application.
- Set the digital torque wrench to the specified torque value (refer to the vehicle's service manual).
- Attach the appropriate socket to the torque wrench.
- Apply torque to the bolt in a clockwise direction until the wrench signals the correct torque has been reached.
- Use the torque angle gauge to verify the angle of rotation if required.
- Repeat the process for all specified body bolts.
Technical Service Bulletins
Body Bolt Torque Specification Update
2021-05-15Updated torque specifications for body bolts on 2020-Present Hyundai Palisade models.
Resolution: Refer to the updated torque specifications in the service manual and ensure all body bolts are torqued to the new values.
Body Bolt Loosening Issue
2022-03-10Reports of body bolts loosening over time on certain 2020-Present Hyundai Palisade models.
Resolution: Inspect all body bolts for proper torque and re-torque if necessary. Apply thread locker to prevent future loosening.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.