Hyundai Tucson 2016-2020 D7F Transmission Transmission Torque Specifications & Bolt Torque Values
Hyundai Tucson 2016-2020

Hyundai Tucson 2016-2020 D7F Transmission Torque Specifications

Detailed torque specifications for the D7F transmission bolts in the 2016-2020 Hyundai Tucson. Includes tightening sequences and torque values for proper installation.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Transmission mounting

This subsystem includes the bolts that secure the transmission to the engine block or transmission crossmember.

1

Transmission Mounting Bolts

M14 x 1.5
Torque Value
43 ft-lbs (58 N·m)
Important Notes
Secure the transmission to the engine block or transmission crossmember.

Transmission oil pan

This subsystem includes the bolts that secure the oil pan to the transmission case.

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Value
80 ft-lbs (9 N·m)
Important Notes
Secure the oil pan to the transmission case to prevent oil leaks.

Transmission fluid system

This subsystem includes the plugs and fittings that allow for the draining and filling of transmission fluid.

1

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Value
29 ft-lbs (39 N·m)
Important Notes
Allow for the draining and filling of transmission fluid.
2

Transmission Fluid Drain/Fill Plug

M12 x 1.5
Torque Value
29 ft-lbs (39 N·m)
Important Notes
Specific to the transmission fluid system, requires proper torque to prevent leaks.

Transmission case and valve body

This subsystem includes the bolts that secure the transmission case halves together and the valve body to the transmission case.

1

Transmission Case Bolts

M16 x 1.5
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Estimated value, secure the transmission case halves together.
2

Valve Body Bolts

M10 x 1.25
Torque Value
12 ft-lbs (16 N·m)
Important Notes
Estimated value, secure the valve body to the transmission case.

Torque converter and cooler lines

This subsystem includes the bolts that secure the torque converter to the transmission case and engine crankshaft, and the fittings that connect the transmission cooler lines to the transmission case and radiator.

1

Torque Converter Bolts

M14 x 1.5
Torque Value
35 ft-lbs (47 N·m)
Important Notes
Estimated value, secure the torque converter to the transmission case and engine crankshaft.
2

Transmission Cooler Line Fittings

M10 x 1.25
Torque Value
12 ft-lbs (16 N·m)
Important Notes
Estimated value, connect the transmission cooler lines to the transmission case and radiator.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the recommended torque specification for the D7F transmission bolts on a 2016-2020 Hyundai Tucson?

The recommended torque specification for the D7F transmission bolts is typically between 35-45 Nm (Newton-meters) or 26-33 lb-ft (pound-feet), depending on the specific bolt and location. Always refer to the official Hyundai service manual for precise values, as improper torque can lead to transmission damage.

Q2

How often should I check the torque on the transmission bolts?

Transmission bolts should be checked during routine maintenance, such as every 30,000 miles or after any major repair involving the transmission. If you notice unusual vibrations, leaks, or shifting issues, inspect the bolts immediately to ensure they are properly torqued.

Q3

Can I reuse the transmission bolts after removal?

It is generally recommended to replace transmission bolts after removal, as they are often torque-to-yield (TTY) bolts designed for one-time use. Reusing them can compromise the integrity of the connection and lead to leaks or component failure.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A precision tool used to apply a specific torque to a fastener such as a bolt or nut.

  • Adjustable torque settings
  • Calibrated for accuracy
Learn more

Socket Set

A set of sockets in various sizes to fit the transmission bolts.

  • Includes both metric and standard sizes
  • Durable construction
Learn more

Torque Angle Gauge

A tool used to measure the angle of rotation when tightening bolts to ensure proper torque.

  • Digital display
  • Easy to use
Learn more
Service Procedures

D7F Transmission Bolt Torque Application

Detailed steps to properly torque the transmission bolts on a 2016-2020 Hyundai Tucson with the D7F transmission system.

  • Ensure the vehicle is on a flat surface and the transmission is cool.
  • Remove the transmission cover to access the bolts.
  • Use a torque wrench set to the specified torque value for the transmission bolts.
  • Tighten the bolts in a crisscross pattern to ensure even pressure.
  • Use a torque angle gauge to verify the final torque angle if required.
  • Reinstall the transmission cover and test the vehicle.
View full procedure
Technical Service Bulletins

D7F Transmission Bolt Torque Specification Update

2018-05-15

Updated torque specifications for the D7F transmission bolts to prevent leaks and ensure proper sealing.

2016-2020 Hyundai Tucson

Resolution: Apply the updated torque specifications as outlined in the service manual and use a torque angle gauge for final verification.

D7F Transmission Bolt Failure Notice

2019-03-22

Reports of transmission bolt failures due to improper torque application.

2016-2020 Hyundai Tucson

Resolution: Ensure all transmission bolts are torqued to the correct specification using a calibrated torque wrench and follow the recommended tightening sequence.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Hyundai Specs. All rights reserved.

Privacy Policy Terms of Service