Hyundai Tucson 2021-present Suspension Bolt Torque Specifications & Fastener Values
Hyundai Tucson 2021-present

Hyundai Tucson 2021-present Suspension Bolt Torque Specifications

Detailed torque specifications for suspension bolts on the 2021-Present Hyundai Tucson, including front and rear suspension components.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Strut And Shock Absorber

Components that secure the strut/shock absorber to the vehicle's frame, ensuring proper suspension alignment and stability.

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Value
50 ft-lbs (68 N·m)
Important Notes
Estimated average value from the given range of 44-57 ft-lbs (59-77 Nm).

Control Arms

Components that connect the control arms to the frame and suspension components, maintaining proper suspension geometry and preventing excessive movement.

1

Upper Control Arm Bolts

M16 x 1.5
Torque Value
77 ft-lbs (105 N·m)
Important Notes
Estimated average value from the given range of 70-85 ft-lbs (95-115 Nm).
2

Lower Control Arm Bolts

M18 x 1.5
Torque Value
100 ft-lbs (136 N·m)
Important Notes
Estimated average value from the given range of 90-110 ft-lbs (122-149 Nm).
3

Control Arm Bolts

M16 x 1.5
Torque Value
90 ft-lbs (122 N·m)
Important Notes
Estimated average value from the given range of 80-100 ft-lbs (108-135 Nm).

Ball Joints And Tie Rods

Components that secure the ball joint and tie rod to the control arm and steering knuckle, allowing for smooth suspension movement while maintaining proper alignment.

1

Ball Joint Nut

M20 x 1.5
Torque Value
90 ft-lbs (122 N·m)
Important Notes
Estimated average value from the given range of 80-100 ft-lbs (108-135 Nm).
2

Tie Rod End Nut

M14 x 1.5
Torque Value
36 ft-lbs (49 N·m)
Important Notes
Estimated average value from the given range of 32-40 ft-lbs (43-54 Nm).

Sway Bar And Coil Spring

Components that secure the sway bar and coil spring to the suspension components, maintaining proper suspension stability and preventing excessive movement.

1

Sway Bar Link Nut

M12 x 1.5
Torque Value
35 ft-lbs (48 N·m)
Important Notes
Estimated average value from the given range of 30-40 ft-lbs (41-54 Nm).
2

Coil Spring Mounting Bolts

M14 x 1.5
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Estimated average value from the given range of 40-50 ft-lbs (54-68 Nm).

Steering Knuckle

Components that secure the steering knuckle to the suspension components, ensuring proper steering alignment and preventing excessive play.

1

Steering Knuckle Bolts

M18 x 1.5
Torque Value
90 ft-lbs (122 N·m)
Important Notes
Estimated average value from the given range of 80-100 ft-lbs (108-135 Nm).

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What are the torque specifications for the suspension bolts on a 2021-Present Hyundai Tucson?

The torque specifications for the suspension bolts vary depending on the specific component. For example, the front lower arm-to-knuckle bolt typically requires 90-110 Nm (66-81 lb-ft), while the rear shock absorber lower mounting bolt requires 70-90 Nm (52-66 lb-ft). Always refer to the official Hyundai service manual for precise values.

Q2

How often should I check the torque on suspension bolts?

It is recommended to check the torque on suspension bolts during routine maintenance, such as every 10,000-15,000 miles, or after any suspension-related repairs. Additionally, inspect them if you notice unusual noises, vibrations, or handling issues.

Q3

Can I reuse suspension bolts after removal?

Hyundai recommends replacing suspension bolts after removal, as they are often torque-to-yield (TTY) bolts designed for one-time use. Reusing them can compromise the structural integrity of the suspension system.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A precision tool used to apply a specific torque to suspension bolts.

  • Adjustable torque settings
  • Durable construction for heavy-duty use
Learn more

Socket Set

A set of sockets compatible with suspension bolt sizes.

  • Includes metric sizes
  • Impact-rated for durability
Learn more

Breaker Bar

A long-handled tool used to loosen tight suspension bolts.

  • High torque application
  • Ergonomic handle
Learn more
Service Procedures

Front Suspension Bolt Torque Application

Procedure for applying the correct torque to front suspension bolts on a 2021-Present Hyundai Tucson.

  • Lift the vehicle and secure it on jack stands.
  • Remove the front wheels to access the suspension components.
  • Use a torque wrench to tighten the lower control arm bolts to 85-95 ft-lbs.
  • Tighten the strut-to-knuckle bolts to 65-75 ft-lbs.
  • Reinstall the wheels and lower the vehicle.
View full procedure

Rear Suspension Bolt Torque Application

Procedure for applying the correct torque to rear suspension bolts on a 2021-Present Hyundai Tucson.

  • Lift the vehicle and secure it on jack stands.
  • Remove the rear wheels to access the suspension components.
  • Use a torque wrench to tighten the rear trailing arm bolts to 70-80 ft-lbs.
  • Tighten the rear shock absorber bolts to 45-55 ft-lbs.
  • Reinstall the wheels and lower the vehicle.
View full procedure
Technical Service Bulletins

Suspension Bolt Torque Specification Update

2022-03-15

Updated torque specifications for suspension bolts on 2021-Present Hyundai Tucson models.

2021-Present Hyundai Tucson

Resolution: Refer to the latest service manual for updated torque values and ensure proper tightening procedures are followed.

Suspension Noise Investigation

2023-01-10

Investigation into suspension-related noises caused by improperly torqued bolts.

2021-Present Hyundai Tucson

Resolution: Verify torque specifications for all suspension bolts and retighten as necessary to eliminate noise.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Hyundai Specs. All rights reserved.

Privacy Policy Terms of Service