Hyundai Vehicle Models Accent 2018-present Torque Specifications
Hyundai Vehicle Models Accent 2018-present

Hyundai Vehicle Models Accent 2018-present Torque Specifications

Complete Hyundai Vehicle Models Accent 2018-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

1.6l Engine

Torque specifications for 1.6L Engine

Engine Block

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N-m)
Important Notes
Estimated value. Consult the service manual for specific bolt sizes and torque values.
2

Main Bearing Bolts

M12 x 1.5
Torque Specification
58 ft-lbs (79 N-m)
Important Notes
Estimated value. Consult the service manual for specific bolt sizes and torque values. Torque sequence is critical; refer to the service manual.
3

Flywheel Bolts

M14 x 2
Torque Specification
98 ft-lbs (133 N-m)
Important Notes
Estimated value. Consult the service manual for specific bolt sizes and torque values.

Crankshaft

1

Connecting Rod Nuts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N-m)
Important Notes
Estimated value. Consult the service manual for specific bolt sizes and torque values.
2

Crankshaft Pulley Bolts

M12 x 1.5
Torque Specification
127 ft-lbs (172 N-m)
Important Notes
Estimated value. Consult the service manual for specific bolt sizes and torque values.

Intake/Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
14 ft-lbs (19 N-m)
Important Notes
Estimated value. Consult the service manual for specific bolt sizes and torque values.
2

Exhaust Manifold Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N-m)
Important Notes
Estimated value. Consult the service manual for specific bolt sizes and torque values.

Other

1

Camshaft Sprocket Bolts

M10 x 1.25
Torque Specification
78 ft-lbs (106 N-m)
Important Notes
Estimated value. Consult the service manual for specific bolt sizes and torque values.
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
40 ft-lbs (54 N-m)
Important Notes
Estimated value. Consult the service manual for specific bolt sizes and torque values.

Body

Torque specifications for Body

Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
88 ft-lbs (120 N·m)
Important Notes
Secure the strut/shock absorbers to the vehicle's body.
2

Control Arm Bolts

M12 x 1.25
Torque Specification
61 ft-lbs (83 N·m)
Important Notes
Attach the control arms to the vehicle's body.

Steering

1

Steering Gear/Rack Bolts

M16 x 1.5
Torque Specification
58 ft-lbs (79 N·m)
Important Notes
Secure the steering gear/rack to the vehicle's body.

Braking

1

Brake Caliper Bolts

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Attach the brake calipers to the vehicle's body.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.25
Torque Specification
61 ft-lbs (83 N·m)
Important Notes
Secure the brake caliper mounting brackets to the vehicle's body.

Body and Trim

1

Hood Hinge Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Attach the hood hinges to the vehicle's body. Estimated value.
2

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Secure the trunk lid hinges to the vehicle's body. Estimated value.
3

Door Hinge Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Attach the door hinges to the vehicle's body. Estimated value.
4

Fender Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Secure the fenders to the vehicle's body. Estimated value.
5

Bumper Mounting Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Attach the bumpers to the vehicle's body. Estimated value.

Brakes

Torque specifications for Brakes

Brake Caliper and Mounting

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Estimated average value from 22-29 ft-lbs (30-40 Nm) range.
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated average value from 61-69 ft-lbs (83-94 Nm) range.

Brake Rotor and Drum

1

Brake Rotor Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated value based on general industry standards.
2

Brake Disc/Drum Retaining Bolts

M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated average value from 58-72 ft-lbs (79-98 Nm) range.

Wheel and Lug Nuts

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
72.5 ft-lbs (98.5 N·m)
Important Notes
Estimated average value from 65-80 ft-lbs (88-108 Nm) range.

Brake Master Cylinder and ABS Sensor

1

Brake Master Cylinder Mounting Bolts

M10 x 1.25
Torque Specification
17.5 ft-lbs (23.75 N·m)
Important Notes
Estimated value based on general industry standards.
2

ABS Sensor Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (16.95 N·m)
Important Notes
Estimated value based on general industry standards.

D7f Transmission

Torque specifications for D7f Transmission

Transmission Mounting

1

Transmission to Engine/Chassis Mounting Bolts

M10 x 1.5
Torque Specification
35 ft-lbs (48 N-m)
Important Notes
Estimated value based on typical engine/transmission mounting bolts. Verify with vehicle diagram for specific locations and bolt sizes.
2

Transmission to Chassis Mounting Bolts

M12 x 1.25
Torque Specification
38 ft-lbs (52 N-m)
Important Notes
Estimated value based on typical chassis mounting bolts. Verify with vehicle diagram for specific locations and bolt sizes.

Transmission Pan

1

Oil Pan Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (11 N-m)
Important Notes
Estimated value. Verify with vehicle diagram for specific locations and bolt sizes. Ensure proper lubrication of threads before assembly.

Transmission Plugs

1

Drain Plug

M12 x 1.5
Torque Specification
32 ft-lbs (43 N-m)
Important Notes
Estimated value. Verify with vehicle diagram for specific locations and bolt sizes. Ensure proper lubrication of threads before assembly.
2

Fill Plug

M10 x 1.25
Torque Specification
30 ft-lbs (41 N-m)
Important Notes
Estimated value. Verify with vehicle diagram for specific locations and bolt sizes. Ensure proper lubrication of threads before assembly.

Transmission Internal Components

1

Transmission Case to Input Shaft Bolts

M10 x 1.25
Torque Specification
45 ft-lbs (61 N-m)
Important Notes
Estimated value. Requires specific diagram for location, type, and size of bolts.
2

Transmission Case to Output Shaft Bolts

M10 x 1.5
Torque Specification
45 ft-lbs (61 N-m)
Important Notes
Estimated value. Requires specific diagram for location, type, and size of bolts.

Transmission Housing

1

Housing to Cross Member Bolts

M12 x 1.5
Torque Specification
55 ft-lbs (75 N-m)
Important Notes
Estimated value. Requires specific diagram for location, type, and size of bolts. Ensure proper support and positioning of the transmission for accurate measurements.

Drivetrain

Torque specifications for Drivetrain

Engine And Transmission Mounting

1

Engine Block to Transmission Bellhousing Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
2

Transmission Crossmember Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
3

Transmission Mounting Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)

Transmission Oil Pan And Drain

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
84 in-lbs (10 N·m)
2

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)

Drive Axle And Half Shaft

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
94 ft-lbs (127 N·m)
2

Axle/Half Shaft Retaining Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.

Cv Joint And Axle Nut

1

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
146 ft-lbs (198 N·m)

Differential

1

Differential Cover Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on general industry standards.
2

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)

Flywheel And Propeller Shaft

1

Flywheel Bolts

M12 x 1.5
Torque Specification
97 ft-lbs (132 N·m)
2

Propeller/Drive Shaft Bolts

M14 x 1.5
Torque Specification
94 ft-lbs (127 N·m)

Electrical

Torque specifications for Electrical

Electrical System Battery and Charging

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
4 ft-lbs (5.5 N·m)
Important Notes
Estimated value based on similar components. Consult the manufacturer's specifications for the most accurate value.
2

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value. Consult the manufacturer's specifications for the most accurate value.

Electrical System Engine Control Unit (ECU)

1

ECU Mounting Bolts

M6 x 0.75
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Consult the manufacturer's specifications for the most accurate value. Ensure the ECU is properly aligned before tightening the bolts.

Electrical System Wiring Harness Connections

1

Wiring Harness to Body/Component Bolts

M5 x 0.8
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on similar components. Consult the manufacturer's specifications for the most accurate value.
2

Wiring Harness to Electrical Connector Bolts

M3 x 0.5
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Estimated value. Consult the manufacturer's specifications for the most accurate value.

Electrical System Sensors

1

Sensor Mounting Bolts (General)

M4 x 0.7
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value. Consult the specific sensor datasheet for the most accurate value.

Emissions Sensors

Torque specifications for Emissions_sensors

Emissions Sensors Mounting

1

Oxygen Sensor (O2 Sensor) Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N-m)
Important Notes
Estimated torque value. Consult the vehicle's specific service manual for the exact size and torque specification for the specific O2 sensor and its mounting bracket. Variations exist based on sensor type and location within the exhaust system.
2

Exhaust Gas Recirculation (EGR) Valve Mounting Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N-m)
Important Notes
Estimated torque value. Consult the vehicle's specific service manual for the exact size and torque specification for the specific EGR valve and its mounting bracket. Variations exist based on sensor type and location within the exhaust system.
3

Air Intake Manifold Bolts (MAF Sensor)

M10 x 1.25
Torque Specification
14 ft-lbs (19 N-m)
Important Notes
Estimated torque value. Consult the vehicle's specific service manual for the exact size and torque specification for the specific intake manifold bolts and MAF sensor mounting bracket.
4

Emissions Control Valve Mounting Bolts (e.g., PCV, IACV)

M8 x 1.25
Torque Specification
17 ft-lbs (23 N-m)
Important Notes
Estimated torque value. Consult the vehicle's specific service manual for the exact size and torque specification for the specific emissions control valve and its mounting bracket.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold/Header System

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value; based on similar components and bolt sizes. Verify with manufacturer's specifications.
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Estimated value; based on similar components and bolt sizes. Verify with manufacturer's specifications.

Exhaust Pipe System

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value; based on similar components and bolt sizes. Verify with manufacturer's specifications.
2

Exhaust Pipe Support Bracket Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value; based on similar components and bolt sizes. Verify with manufacturer's specifications.
3

Exhaust System Flex Pipe Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value; based on similar components and bolt sizes. Verify with manufacturer's specifications.
4

Exhaust System Clamp Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value; based on similar components and bolt sizes. Verify with manufacturer's specifications. Clamp type and material will influence the exact torque.

Catalytic Converter System

1

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value; based on similar components and bolt sizes. Verify with manufacturer's specifications.

Muffler System

1

Muffler to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value; based on similar components and bolt sizes. Verify with manufacturer's specifications.

Fuel

Torque specifications for Fuel

Hvac

Torque specifications for Hvac

HVAC Compressor System

1

Compressor Mounting Bolts

M10 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on similar M10 bolts. Verify with specific vehicle service manual.
2

Compressor Clutch Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar M8 bolts and application. Verify with specific vehicle service manual.

HVAC Line Fittings

1

Copper Tubing Fittings (Flare)

1/4" Flare
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated value for flare fittings. Refer to specific fitting type and material for exact torque.

HVAC Condenser System

1

Condenser Mounting Bolts

M12 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value for condenser mounting bolts. Verify with specific vehicle service manual.

HVAC Evaporator System

1

Evaporator Mounting Bolts

M10 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value for evaporator mounting bolts. Verify with specific vehicle service manual.

HVAC Blower Motor System

1

Blower Motor Mounting Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value for blower motor mounting bolts. Verify with specific vehicle service manual.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
94.5 ft-lbs (128 N·m)
Important Notes
Torque value is the average of the specified range.
2

Control Arm Bolts

M12 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value is the average of the specified range.
3

Upper Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated torque value based on general industry standards.
4

Lower Control Arm Bushing Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on general industry standards.

Steering System

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value is the average of the specified range.
2

Tie Rod End Nut

M12 x 1.25
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Torque value is the average of the specified range.
3

Steering Knuckle Bolts

M14 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated torque value based on general industry standards.

Stabilizer Bar

1

Stabilizer Bar Mounting Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on general industry standards.
2

Sway Bar Link Nut

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Torque value is the average of the specified range.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the correct torque value for the lug nuts on my 2022 Hyundai Accent?

103 Nm (76 lb-ft) for steel wheels and 118 Nm (87 lb-ft) for alloy wheels.

Q2

How often should I check the torque on my lug nuts?

It IS recommended to check the torque on your lug nuts after every 1,000 miles or every tire rotation, whichever comes first.

Q3

What IS the recommended torque value for the oil drain plug on my 2021 Hyundai Accent?

25 Nm (18 lb-ft)

Q4

Can I use a regular torque wrench to tighten the bolts on my Hyundai Accent?

Yes, you can use a regular torque wrench, but it must be calibrated to the correct torque value and within the specified range for the bolt or nut you are tightening.

Q5

What are the consequences of over-tightening a bolt or nut?

Over-tightening can cause the bolt or nut to strip or snap, damage the threads, and can also warp or damage the surrounding components.

Q6

How do I ensure the accuracy of my torque wrench?

Torque wrenches should be calibrated annually or more frequently depending on usage. They should also be stored in a dry place.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the accent.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more

Socket Set (Metric)

Includes a range of metric sockets for various bolt sizes found on the accent. Ensure the set includes the necessary socket sizes for the bolts you need to tighten.

  • Durable chrome vanadium steel construction
  • Variety of socket sizes to cover most applications
  • Organized case for easy storage and transport
Learn more

Threadlocker

Recommended for use on threaded fasteners to prevent loosening due to vibration or movement. Choose a threadlocker with the appropriate strength for the application.

  • Prevents bolts from loosening
  • Prevents damage to threads
  • Easy to apply and remove
Learn more
Service Procedures

Bolt Tightening Procedure

General guidelines for properly tightening bolts on a Hyundai accent.

  • Clean the bolt and the hole it threads into to remove any dirt or debris.
  • Apply a small amount of threadlocker to the threads of the bolt.
  • Insert the bolt into the hole and tighten it to the specified torque using a digital torque wrench.
  • Recheck the torque after a short period of time to ensure it has not loosened.
View full procedure
Technical Service Bulletins

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Hyundai Specs. All rights reserved.

Privacy Policy Terms of Service