Hyundai Vehicle Models Azera 2011-2014 Torque Specifications
Hyundai Vehicle Models Azera 2011-2014

Hyundai Vehicle Models Azera 2011-2014 Torque Specifications

Complete Hyundai Vehicle Models Azera 2011-2014 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

3.3l Engine

Torque specifications for 3.3L Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2

Engine Block to Transmission Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value, not explicitly listed in the manual.
3

Engine Block to Engine Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value, not explicitly listed in the manual.

Main Bearings and Crankshaft

1

Main Bearing Bolts

M16 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M18 x 1.5
Torque Specification
130 ft-lbs (176 N·m)

Valvetrain and Timing System

1

Valve Cover Bolts

M10 x 1.5
Torque Specification
72 in-lbs (8 N·m)
2

Timing Belt/Chain Tensioner Bolt

M12 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
3

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
43 ft-lbs (58 N·m)

Fuel System and Intake Manifold

1

Throttle Body Bolts

M10 x 1.5
Torque Specification
13 ft-lbs (18 N·m)
2

Intake Manifold Bolts

M12 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
3

Fuel Rail Bolts

M8 x 1.25
Torque Specification
87 in-lbs (10 N·m)

Exhaust System and EGR Valve

1

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
2

EGR Valve Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)

Ignition System and Spark Plugs

1

Spark Plugs

M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
2

Ignition Coil Bolt

M8 x 1.25
Torque Specification
7 ft-lbs (9 N·m)

Cooling System and Water Pump

1

Water Pump Bolts

M12 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
2

Water Pump Pulley Bolts

M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
3

Thermostat Housing Bolts

M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)

A6f Transmission

Torque specifications for A6f Transmission

Body

Torque specifications for Body

Suspension and Steering

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2

Control Arm Bolts

M16 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
3

Ball Joint Nut

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
4

Tie Rod End Nut

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
5

Sway Bar Link Nut

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
6

Steering Gear/Rack Bolts

M18 x 1.5
Torque Specification
80 ft-lbs (108 N·m)

Body Mounting and Hinges

1

Body Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, may vary depending on location and type of bolt.
2

Door Hinge Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value, may vary depending on location and type of bolt.
3

Trunk Lid Hinge Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value, may vary depending on location and type of bolt.
4

Hood Hinge Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value, may vary depending on location and type of bolt.
5

Bumper Mounting Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, may vary depending on location and type of bolt.

Brakes

Torque specifications for Brakes

Brake Caliper Subsystem

1

Brake Caliper Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on typical M8 caliper bolts.
2

Brake Caliper Mounting Bracket Bolts

M10 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on typical M10 caliper bracket bolts.

Brake Disc/Drum Subsystem

1

Brake Disc/Drum Retaining Bolts

M12 x 1.75
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on typical M12 disc/drum retaining bolts.

Brake Line Subsystem

1

Brake Line Fittings (Compression)

1/4"-28
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value for compression fittings. Precise torque depends on the specific fitting type and size. Refer to the manufacturer's specifications for the exact required torque.

Brake Pedal Subsystem

1

Brake Pedal Mounting Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value for typical M10 brake pedal mounting bolts.

Wheel Cylinder Subsystem

1

Wheel Cylinder Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value for typical M8 wheel cylinder bolts.

Wheel Hub Subsystem

1

Wheel Hub Bolts

M14 x 2.0
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value for typical M14 wheel hub bolts.

Drivetrain

Torque specifications for Drivetrain

Engine

1

Flywheel Bolts

M12 x 1.25
Torque Specification
61 ft-lbs (83 N·m)
Important Notes
Secure the flywheel to the crankshaft.
2

Main Bearing Bolts

M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Hold the main bearings in place.
3

Connecting Rod Nuts

M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Secure the connecting rods to the crankshaft.

Crankshaft

1

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Secure the pulley/balancer to the crankshaft.

Transmission

1

Transmission Mounting Bolts

M12 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secure the transmission to the engine block or transmission crossmember.
2

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Secure the oil pan to the transmission.

Driveshaft

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Secure the axles to the transmission or differential.
2

Propeller/Drive Shaft Bolts

M16 x 1.5
Torque Specification
54 ft-lbs (73 N·m)
Important Notes
Secure the drive shaft to the transmission or differential.

Axle

1

CV Joint/Axle Nut

M18 x 1.5
Torque Specification
159 ft-lbs (216 N·m)
Important Notes
Secure the CV joint to the axle.

Differential

1

Differential Drain/Fill Plug

M12 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Secure the differential fluid.

Additional Components

1

Engine Block to Transmission Bellhousing Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Secure the engine block to the transmission bellhousing. Estimated torque value.
2

Transmission Crossmember Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Secure the transmission crossmember to the frame. Estimated torque value.
3

Differential Cover Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Secure the differential cover to the differential. Estimated torque value.
4

Axle Shaft Retaining Bolts

M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Secure the axle shafts to the differential or transmission. Estimated torque value.

Electrical

Torque specifications for Electrical

Engine Electrical System

1

Ignition Coil Mounting Bolt

M8 x 1.25
Torque Specification
7 ft-lbs (9.5 N-m)
Important Notes
Standard torque value for M8 x 1.25 bolts. Ensure proper seating of the ignition coil before tightening.
2

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N-m)
Important Notes
Standard torque value for M10 x 1.5 bolts. Ensure alternator is properly seated on the mounting surface before tightening.
3

Battery Terminal Nut

M8 x 1.25
Torque Specification
5 ft-lbs (7 N-m)
Important Notes
Estimated torque value for M8 x 1.25 bolt. Tighten only until the cable is securely connected. Overtightening may damage terminal.

Wiring Harness

1

Wiring Harness Bolt/Clamp

M6 x 1.0
Torque Specification
3 ft-lbs (4 N-m)
Important Notes
Estimated torque value for M6 x 1.0 bolts. Ensure proper seating of the harness. Overtightening may damage the wiring.
2

Wiring Connector Terminal Screws

M3 x 0.5
Torque Specification
1 ft-lbs (1.4 N-m)
Important Notes
Estimated torque value for M3 x 0.5 screws. Refer to connector manufacturer specifications for specific torque requirements.

Control Unit

1

ECU Mounting Bolt

M6 x 1.0
Torque Specification
4 ft-lbs (5.5 N-m)
Important Notes
Estimated torque value for M6 x 1.0 bolts. Refer to specific ECU documentation for exact values.

Emissions Sensors

Torque specifications for Emissions_sensors

Emissions System Bolts

1

Oxygen Sensor (O2 Sensor) Mounting Bolts (Front Bank)

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Torque specifications may vary based on specific sensor model and mounting bracket. Ensure proper sensor seating and alignment.
2

Oxygen Sensor (O2 Sensor) Mounting Bolts (Rear Bank)

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Torque specifications may vary based on specific sensor model and mounting bracket. Ensure proper sensor seating and alignment.
3

Catalytic Converter Mounting Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value. Torque specifications may vary greatly based on the specific catalytic converter and mounting bracket. Ensure the converter is properly seated before tightening.
4

Exhaust Manifold to Catalytic Converter Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value. Torque specifications may vary based on specific manifold and converter models. Ensure no leaks are present before tightening.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold/Header System

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (25 N-m)
Important Notes
Estimated value, specific size and thread pitch should be confirmed for the vehicle.
2

Exhaust Manifold/Headers to Downpipe Bolts

M12 x 1.5
Torque Specification
33 ft-lbs (45 N-m)
Important Notes
Estimated value, specific size and thread pitch should be confirmed for the vehicle.

Exhaust Pipe System

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
33 ft-lbs (45 N-m)
Important Notes
Estimated value, specific size and thread pitch should be confirmed for the vehicle.
2

Exhaust Pipe Support Bracket Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N-m)
Important Notes
Estimated value, specific size and thread pitch should be confirmed for the vehicle.
3

Exhaust System Clamp Bolts

M6 x 1
Torque Specification
20 ft-lbs (27 N-m)
Important Notes
Estimated value, specific size and thread pitch should be confirmed for the vehicle. Clamp type and material affect the correct torque.

Catalytic Converter/Muffler System

1

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (25 N-m)
Important Notes
Estimated value, specific size and thread pitch should be confirmed for the vehicle.
2

Muffler to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (25 N-m)
Important Notes
Estimated value, specific size and thread pitch should be confirmed for the vehicle.

Fuel

Torque specifications for Fuel

Fuel System Bolts and Fittings

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
8.7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Consult vehicle-specific repair manual for precise values.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated value based on similar components. Consult vehicle-specific repair manual for precise values.
3

Fuel Filter Mounting Bolts

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on similar components. Consult vehicle-specific repair manual for precise values.
4

Fuel Pump Mounting Bolts

M12 x 1.75
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components. Consult vehicle-specific repair manual for precise values.
5

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on similar components. Consult vehicle-specific repair manual for precise values. Consider specific strap bolt location and size for precise torque application.
6

Fuel Filler Neck Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components. Consult vehicle-specific repair manual for precise values.

Fuel Lines and Fittings

1

Fuel Line Clamps (various sizes)

N/A
Important Notes
Torque values dependent on clamp type and size. Consult vehicle-specific repair manual for precise values.
2

Fuel Line Fittings (Banjo Bolts, Quick Disconnects)

various
Important Notes
Torque values specific to the fitting type and size. Consult vehicle-specific repair manual for precise values.

Fuel Pressure Regulator

1

Fuel Pressure Regulator Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar components. Consult vehicle-specific repair manual for precise values.

Hvac

Torque specifications for Hvac

HVAC Compressor Mounting

1

Compressor Mounting Bolt

M10 x 1.25
Torque Specification
18 ft-lbs (25 N-m)
Important Notes
Standard torque for M10 x 1.25 compressor mounting bolts. Ensure bolt is properly lubricated.

HVAC Refrigerant Lines

1

Refrigerant Line Fitting

1/4 in-28
Torque Specification
18 ft-lbs (25 N-m)
Important Notes
Estimated torque for common refrigerant line fittings 1/4 in-28. Consult manufacturer's specifications for specific fittings.

HVAC Condenser Mounting

1

Condenser Mounting Bolt

M8 x 1.25
Torque Specification
15 ft-lbs (20 N-m)
Important Notes
Estimated torque for M8 x 1.25 condenser mounting bolts. Consult manufacturer's specifications for specific bolts and vehicle models.

HVAC Evaporator Mounting

1

Evaporator Mounting Bolt

M6 x 1.0
Torque Specification
15 ft-lbs (20 N-m)
Important Notes
Estimated torque for M6 x 1.0 evaporator mounting bolts. Verify with manufacturer's specifications for specific bolts and vehicle models.

HVAC Blower Motor Mounting

1

Blower Motor Mounting Bolt

M8 x 1.25
Torque Specification
10 ft-lbs (14 N-m)
Important Notes
Estimated torque for M8 x 1.25 blower motor mounting bolts. Consult manufacturer's specifications for specific bolts and vehicle models.

HVAC Ducting Mounting

1

Ducting Mounting Bolt

M5 x 0.8
Torque Specification
5 ft-lbs (7 N-m)
Important Notes
Estimated torque for M5 x 0.8 ducting mounting bolts, check for specific bolts and vehicle models.

Suspension

Torque specifications for Suspension

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What are the torque specifications for lug nuts on the 2011-2014 Hyundai Azera?

Lug nuts: 81-99 ft-lbs (110-135 Nm)

Q2

What IS the recommended torque range for the spark plugs?

Spark plugs: 13-16 ft-lbs (18-22 Nm)

Q3

What tools are recommended for ensuring accurate torque application?

Use a properly calibrated torque wrench or torque multiplier. Refer to Hyundai service bulletins for specific tool recommendations.

Q4

How do I properly tighten bolts to the specified torque?

Clean bolt threads and apply a small amount of anti-seize lubricant. Hand-tighten the bolt, then use the torque wrench to apply the specified torque in one smooth motion. Avoid over-tightening.

Q5

What are the potential consequences of over-tightening bolts?

Over-tightening can damage threads, cause bolt breakage, and compromise the integrity of the joint.

Q6

Where can I find additional torque specifications for my vehicle?

Refer to the Hyundai service manual or consult with an authorized Hyundai technician.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the azera.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Bolt Torque Specifications

Step-by-step guide to tightening engine bolts to the correct torque specifications.

  • Remove the engine cover.
  • Locate the bolt you need to tighten.
  • Use the digital torque wrench to tighten the bolt to the specified torque.
  • Repeat for all other engine bolts.
View full procedure

Suspension Bolt Torque Specifications

Step-by-step guide to tightening suspension bolts to the correct torque specifications.

  • Raise the vehicle and support it on jack stands.
  • Locate the bolt you need to tighten.
  • Use the digital torque wrench to tighten the bolt to the specified torque.
  • Repeat for all other suspension bolts.
View full procedure

Brake Bolt Torque Specifications

Step-by-step guide to tightening brake bolts to the correct torque specifications.

  • Remove the wheel.
  • Locate the bolt you need to tighten.
  • Use the digital torque wrench to tighten the bolt to the specified torque.
  • Repeat for all other brake bolts.
View full procedure
Technical Service Bulletins

Technical Service Bulletin: Engine Bolt Torque Specifications

2012-03-01

Correction to engine bolt torque specifications for 2011-2014 azera models.

2011-2014 azera

Resolution: Update torque specifications and retorque affected bolts.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Hyundai Specs. All rights reserved.

Privacy Policy Terms of Service