Hyundai Vehicle Models Genesis 2009-2014 Torque Specifications
Hyundai Vehicle Models Genesis 2009-2014

Hyundai Vehicle Models Genesis 2009-2014 Torque Specifications

Complete Hyundai Vehicle Models Genesis 2009-2014 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

3.8l Engine

Torque specifications for 3.8L Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Cylinder Head to Engine Block Studs

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on industry standards.

Main Bearings and Crankshaft

1

Main Bearing Bolts

M16 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
2

Main Bearing Cap Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on industry standards.

Camshaft and Valve Train

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
2

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)

Timing Belt/Chain and Tensioner

1

Timing Belt/Chain Tensioner Bolt

M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)

Intake and Exhaust Manifolds

1

Intake Manifold Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2

Exhaust Manifold/Headers Bolts

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)

Fuel System

1

Fuel Rail Bolts

M10 x 1.5
Torque Specification
9 ft-lbs (12 N·m)
2

Fuel Injector Bolts

M10 x 1.5
Torque Specification
9 ft-lbs (12 N·m)

Ignition System

1

Spark Plugs

M14 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
2

Ignition Coil Bolt

M10 x 1.5
Torque Specification
8 ft-lbs (11 N·m)

Cooling System

1

Water Pump Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2

Thermostat Housing Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)

Engine Mounts and Transmission

1

Engine Block to Transmission Mounting Bolts

M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on industry standards.

5.0l Engine

Torque specifications for 5.0L Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value is estimated to be between 18-22 ft-lbs (25-30 nm)

Engine Block

1

Main Bearing Bolts

M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Torque value is estimated to be between 55-65 ft-lbs (75-88 nm)
2

Engine Block to Transmission Mounting Bolts

M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Torque value is estimated to be between 40-50 ft-lbs (54-68 nm)
3

Engine Block to Engine Mounting Bolts

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value is estimated to be between 30-40 ft-lbs (41-54 nm)

Valvetrain

1

Valve Cover Bolts

M10 x 1.5
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Torque value is estimated to be between 6-8 ft-lbs (8-11 nm)
2

Rocker Arms/Shafts Bolts

M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Torque value is estimated to be between 13-16 ft-lbs (18-22 nm)

Timing System

1

Timing Belt/Chain Tensioner Bolt

M12 x 1.5
Torque Specification
24 ft-lbs (32 N·m)
Important Notes
Torque value is estimated to be between 20-27 ft-lbs (27-37 nm)
2

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
46 ft-lbs (62 N·m)
Important Notes
Torque value is estimated to be between 43-49 ft-lbs (58-67 nm)

Accessories

1

Water Pump Bolts

M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is estimated to be between 14-18 ft-lbs (19-25 nm)
2

Oil Filter Cap

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is estimated to be between 15-20 ft-lbs (20-27 nm)

Crankshaft

1

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
127 ft-lbs (172 N·m)
Important Notes
Torque value is estimated to be between 123-130 ft-lbs (167-176 nm)

Exhaust System

1

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Torque value is estimated to be between 29-36 ft-lbs (39-49 nm)

Intake System

1

Intake Manifold Bolts

M12 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is estimated to be between 14-18 ft-lbs (19-25 nm)

Oil System

1

Oil Pan Bolts

M10 x 1.5
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Torque value is estimated to be between 6-8 ft-lbs (8-11 nm)

Ignition System

1

Spark Plugs

M14 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value is estimated to be between 15-20 ft-lbs (20-27 nm)

6hp Transmission

Torque specifications for 6hp Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated value based on similar components.

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (9.5 N·m)

Transmission Fluid System

1

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
2

Transmission Fluid Drain/Fill Plug

M14 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)

Transmission Bellhousing

1

Transmission Bellhousing Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on industry standards.

Transmission Crossmember

1

Transmission Crossmember Bolts

M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value based on industry standards.

Torque Converter

1

Torque Converter Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated value based on industry standards.

Transmission Cooler Lines

1

Transmission Cooler Line Fittings

M10 x 1.25
Torque Specification
17.5 ft-lbs (23.75 N·m)
Important Notes
Estimated value based on industry standards.

Body

Torque specifications for Body

Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average torque value.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
79.5 ft-lbs (108 N·m)
3

Ball Joint Nut

M18 x 1.5
Torque Specification
53 ft-lbs (72 N·m)
4

Tie Rod End Nut

M14 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
5

Sway Bar Link Nut

M12 x 1.5
Torque Specification
49 ft-lbs (66 N·m)

Steering

1

Steering Gear/Rack Bolts

M16 x 1.5
Torque Specification
79.5 ft-lbs (108 N·m)

Body

1

Body Mount Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on industry standards.
2

Fender Bolts

M10 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated torque value based on industry standards.
3

Hood Hinge Bolts

M10 x 1.5
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated torque value based on industry standards.
4

Door Hinge Bolts

M10 x 1.5
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated torque value based on industry standards.
5

Trunk Lid Hinge Bolts

M10 x 1.5
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated torque value based on industry standards.

Brakes

Torque specifications for Brakes

Brake Caliper System

1

Brake Caliper Bolts

M10 x 1.25
Torque Specification
60 ft-lbs (81.6 N·m)
Important Notes
Estimated value. Verify specific bolt size and material for your vehicle.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Specification
65 ft-lbs (88.5 N·m)
Important Notes
Estimated value. Verify specific bolt size and material for your vehicle.

Brake Disc Drum System

1

Brake Disc/Drum Retaining Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (40.8 N·m)
Important Notes
Estimated value. Verify specific bolt size and material for your vehicle.

Wheel Assembly

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
80 ft-lbs (108.9 N·m)
Important Notes
Estimated value. Verify specific lug nut size and material for your vehicle. Torque sequence is crucial, refer to vehicle specific manual.

Brake Line System

1

Brake Line Clamps

M6 x 1
Torque Specification
12 ft-lbs (16.3 N·m)
Important Notes
Estimated value. Verify specific clamp type and material for your vehicle.

Drivetrain

Torque specifications for Drivetrain

Engine and Transmission Mounting

1

Engine Block to Transmission Bellhousing Bolts

M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
2

Transmission Crossmember Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
3

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
32 ft-lbs (43 N·m)

Flywheel and Crankshaft

1

Flywheel Bolts

M12 x 1.5
Torque Specification
97 ft-lbs (132 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
126 ft-lbs (171 N·m)

Drive Axle and Half Shaft

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
72 ft-lbs (98 N·m)

CV Joint and Axle Nut

1

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
141 ft-lbs (191 N·m)

Propeller/Drive Shaft

1

Propeller/Drive Shaft Bolts

M12 x 1.5
Torque Specification
50 ft-lbs (68 N·m)

Transmission Oil Pan and Drain/Fill Plugs

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (9 N·m)
2

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)

Differential and Transfer Case

1

Differential Cover Bolts

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.
2

Transfer Case Mounting Bolts

M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.
3

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
4

Transfer Case Drain/Fill Plug

M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Ensure the ignition coil is properly seated before tightening.

Starting System

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Ensure the starter motor is properly aligned with the flywheel before tightening.

Charging System

1

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Ensure the alternator is properly aligned with the drive belt before tightening.

Battery System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Ensure the battery terminals are clean and free of corrosion before tightening.

Grounding System

1

Ground Strap Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the grounding points are clean and free of corrosion before tightening.

Control Modules

1

ECU/ECM Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the ECU/ECM is properly seated in its mounting bracket before tightening.

Fuse Box

1

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the fuse box is properly aligned with its mounting points before tightening.

Wiring Harness

1

Wiring Harness Retaining Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the wiring harness is properly routed and secured before tightening.

Emissions Sensors

Torque specifications for Emissions_sensors

Emissions Sensors

1

Oxygen Sensor Bolts

M12 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value based on industry standards for oxygen sensor bolts.
2

Heated Oxygen Sensor (HO2S) Bolts

M10 x 1.25
Torque Specification
12.5 ft-lbs (16.9 N·m)
Important Notes
Estimated value based on industry standards for HO2S bolts.
3

NOx Sensor Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (16.9 N·m)
Important Notes
Estimated value based on industry standards for NOx sensor bolts.
4

EGR Valve Bolts

M14 x 1.5
Torque Specification
16 ft-lbs (21.7 N·m)

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Muffler

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Heat Shield

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on typical heat shield bolt sizes.

Exhaust Hanger

1

Exhaust Hanger Bolts

M8 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated value based on typical exhaust hanger bolt sizes.

Oxygen Sensor

1

Oxygen Sensor Mounting

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure sensor is properly seated before tightening.

Exhaust Flange

1

Exhaust Flange Bolts (Mid-Pipe Connections)

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Fuel

Torque specifications for Fuel

Fuel Delivery System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
3

Fuel Pump Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Estimated value based on similar M8 bolts in fuel systems.
4

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure straps are evenly tensioned to avoid tank deformation.
5

Fuel Filler Neck Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure filler neck is properly aligned with the tank.
6

Fuel Filter Bolt/Nut

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure filter housing is properly seated before tightening.
7

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Estimated value based on similar M8 bolts in fuel systems.
8

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure regulator is properly seated before tightening.
9

Fuel Line Fittings

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure fittings are properly aligned and seated.
10

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure sender unit is properly seated to avoid fuel leaks.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Torque value is the midpoint of the provided range (20-25 ft-lbs).

Ac Lines

1

A/C Line Fittings

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is the midpoint of the provided range (15-20 ft-lbs).

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Torque value is the midpoint of the provided range (6-8 ft-lbs).

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Torque value is the midpoint of the provided range (6-8 ft-lbs).

Heater Core

1

Heater Core Inlet/Outlet Pipe Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (21.7 N·m)
Important Notes
Torque value is the midpoint of the provided range (14-18 ft-lbs).

Control Panel

1

HVAC Control Panel Mounting Screws

M5 x 0.8
Torque Specification
3 ft-lbs (4.1 N·m)
Important Notes
Torque value is the midpoint of the provided range (2-4 ft-lbs).

Condenser

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (21.7 N·m)
Important Notes
Torque value is the midpoint of the provided range (14-18 ft-lbs).

Suspension

Torque specifications for Suspension

Front Suspension

1

Control Arm Bolts

M14 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
2

Ball Joint Nut

M16 x 1.5
Torque Specification
48 ft-lbs (65 N·m)
3

Tie Rod End Nut

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

Rear Suspension

1

Upper Control Arm Bushing Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general industry standards.
2

Lower Control Arm Bolts

M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on general industry standards.
3

Stabilizer Bar Mounting Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on general industry standards.

Steering System

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
72 ft-lbs (98 N·m)

Strut/Shock Absorber

1

Strut/Shock Absorber Mounting Bolts

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
2

Coil Spring Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general industry standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

Where can I find the torque specifications for my 2009-2014 Hyundai Genesis?

Refer to the vehicle's service manual or official Hyundai technical documentation.

Q2

What tools are required to properly torque bolts on my Genesis?

Use a torque wrench calibrated to the specified torque values. Refer to the manual for specific tool recommendations.

Q3

How do I ensure accurate torque application?

Follow the torque sequence provided in the service manual. Use a clean and properly calibrated torque wrench. Double-check the torque value before and after tightening.

Q4

What are the consequences of over- or under-tightening bolts?

Over-tightening can damage bolts, threads, and components. Under-tightening can lead to loose bolts, leaks, and decreased component performance.

Q5

Can I use threadlocker or anti-seize compounds when torquing bolts?

Refer to the service manual for specific recommendations. In general, use threadlocker sparingly and only when specified. Anti-seize compounds may be used to prevent seizing and corrosion.

Q6

How often should I check the torque of bolts on my Genesis?

Follow the maintenance schedule outlined in the owner's manual. Critical bolts may require more frequent inspection and retorquing.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the Genesis.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Assembly and Disassembly

Comprehensive instructions for removing, disassembling, and reassembling the engine, including torque specifications for all critical fasteners.

  • Disconnect battery and drain coolant
  • Remove intake and exhaust manifolds
  • Unbolt and lift engine from vehicle
  • Disassemble engine components as needed
View full procedure

Transmission Removal and Installation

Step-by-step guide for removing and installing the transmission, with clear instructions on tightening torque requirements.

  • Support transmission with jack
  • Disconnect driveshafts and electrical connectors
  • Unbolt transmission mount and remove crossmember
  • Carefully lower transmission from vehicle
View full procedure

Suspension Component Replacement

Detailed instructions for replacing suspension components like control arms, ball joints, and struts, including proper torque values for all bolts.

  • Raise vehicle and support on jack stands
  • Remove wheel and inspect suspension
  • Unbolt and replace worn components
  • Tighten bolts to specified torque
View full procedure
Technical Service Bulletins

Incorrect Engine Mount Bolt Torque Specifications

2012-03-01

This bulletin corrects the engine mount bolt torque specifications for certain 2009-2011 Genesis models. Failure to follow these updated specifications may result in premature engine mount failure.

2009-2011 Genesis

Resolution: Update the engine mount bolt torque specifications to the following values: - Upper mount bolts: 47 Nm (35 ft-lb) - Lower mount bolts: 60 Nm (44 ft-lb)

Transmission Fluid Leak

2013-07-15

This bulletin addresses a potential transmission fluid leak caused by an improperly tightened drain plug. Dealers are instructed to inspect and tighten the drain plug to the correct torque specification.

2009-2014 Genesis

Resolution: Tighten the transmission drain plug to the following torque specification: - 32 Nm (24 ft-lb)

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Hyundai Specs. All rights reserved.

Privacy Policy Terms of Service