Hyundai Vehicle Models Kona 2018-present
Hyundai Vehicle Models Kona 2018-present Torque Specifications
Complete Hyundai Vehicle Models Kona 2018-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
1.6l Engine
Torque specifications for 1.6L Engine
1.6l Engine
Torque specifications for 1.6L Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.25
1
Cylinder Head Bolts
M10 x 1.25
Torque Specification
1. 18 ft-lbs (25 N·m)
2. 90°
Important Notes
Follow the manufacturer's torque sequence for the cylinder head bolts. Failure to do so may result in head gasket failure.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M10 x 1.25
1
Main Bearing Bolts
M10 x 1.25
Torque Specification
54 ft-lbs (73 N·m)
Important Notes
Follow the manufacturer's torque sequence for main bearing bolts.
2 Connecting Rod Nuts
M8 x 1.0
2
Connecting Rod Nuts
M8 x 1.0
Torque Specification
43 ft-lbs (59 N·m)
Important Notes
Ensure the connecting rod bearings are properly installed before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the turbocharger before tightening.
2 Turbocharger Oil Feed Line Bolts
M6 x 1.0
2
Turbocharger Oil Feed Line Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components. Ensure proper sealing of the oil feed line.
Intake And Exhaust
1 Intake Manifold Bolts
M8 x 1.25
1
Intake Manifold Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Follow the manufacturer's torque sequence for intake manifold bolts.
2 Exhaust Manifold Bolts
M8 x 1.25
2
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Follow the manufacturer's torque sequence for exhaust manifold bolts.
1.6l Turbo Engine
Torque specifications for 1.6L-TURBO Engine
1.6l Turbo Engine
Torque specifications for 1.6L-TURBO Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.25
1
Cylinder Head Bolts
M10 x 1.25
Torque Specification
1. 18 ft-lbs (25 N·m)
2. 90°
Important Notes
Follow the manufacturer's torque sequence for the cylinder head bolts. Failure to do so may result in head gasket failure.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M10 x 1.25
1
Main Bearing Bolts
M10 x 1.25
Torque Specification
54 ft-lbs (73 N·m)
Important Notes
Follow the manufacturer's torque sequence for main bearing bolts.
2 Connecting Rod Nuts
M8 x 1.0
2
Connecting Rod Nuts
M8 x 1.0
Torque Specification
43 ft-lbs (59 N·m)
Important Notes
Ensure the connecting rod bearings are properly installed before tightening.
Turbocharger System
1 Turbocharger Mounting Bolts
M8 x 1.25
1
Turbocharger Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the turbocharger before tightening.
2 Turbocharger Oil Feed Line Bolts
M6 x 1.0
2
Turbocharger Oil Feed Line Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components. Ensure proper sealing of the oil feed line.
Intake And Exhaust
1 Intake Manifold Bolts
M8 x 1.25
1
Intake Manifold Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Follow the manufacturer's torque sequence for intake manifold bolts.
2 Exhaust Manifold Bolts
M8 x 1.25
2
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Follow the manufacturer's torque sequence for exhaust manifold bolts.
2.0l Engine
Torque specifications for 2.0L Engine
2.0l Engine
Torque specifications for 2.0L Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper torque sequence to avoid engine damage.
2 Cylinder Head Studs
M14 x 1.5
2
Cylinder Head Studs
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
54 ft-lbs (73 N·m)
Important Notes
Ensure proper torque sequence to avoid bearing failure.
2 Engine Block Main Bearing Cap Bolts
M14 x 1.5
2
Engine Block Main Bearing Cap Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Valvetrain and Intake Manifold
1 Valve Cover Bolts
M10 x 1.5
1
Valve Cover Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure proper torque sequence to avoid oil leaks or engine damage.
2 Intake Manifold Bolts
M12 x 1.5
2
Intake Manifold Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper torque sequence to avoid engine damage or failure.
Timing System and Crankshaft Pulley
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
17 ft-lbs (24 N·m)
Important Notes
Ensure proper torque sequence to avoid timing belt or chain failure.
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
Ensure proper torque sequence to avoid pulley or balancer failure.
Fuel System and Spark Plugs
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper torque sequence to avoid fuel leaks or engine damage.
2 Spark Plugs
M14 x 1.25
2
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure proper torque sequence to avoid spark plug failure or engine damage.
Exhaust System and EGR Valve
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper torque sequence to avoid exhaust leaks or engine damage.
2 EGR Valve Bolts
M10 x 1.5
2
EGR Valve Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper torque sequence to avoid EGR valve failure or engine damage.
Cooling System and Water Pump
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper torque sequence to avoid water pump failure or engine damage.
2 Thermostat Housing Bolts
M10 x 1.5
2
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure proper torque sequence to avoid thermostat failure or engine damage.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension and Steering
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
3 Steering Gear/Rack Bolts
M14 x 1.5
3
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
Brake System
1 Brake Caliper Bolts
M12 x 1.25
1
Brake Caliper Bolts
M12 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
2 Brake Caliper Mounting Bracket Bolts
M14 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Wheels and Tires
1 Wheel Lug Nuts
M14 x 1.5
1
Wheel Lug Nuts
M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Body Panels and Trim
1 Body Panel Bolts
M10 x 1.25
1
Body Panel Bolts
M10 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
2 Bumper Mounting Bolts
M12 x 1.25
2
Bumper Mounting Bolts
M12 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
3 Fender Liner Bolts
M10 x 1.25
3
Fender Liner Bolts
M10 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
4 Door Hinge Bolts
M12 x 1.25
4
Door Hinge Bolts
M12 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
5 Trunk Lid Hinge Bolts
M12 x 1.25
5
Trunk Lid Hinge Bolts
M12 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper System
1 Brake Caliper Bolts
M10 x 1.25
1
Brake Caliper Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the caliper is properly aligned before torquing.
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Critical for maintaining structural integrity of the braking system.
Brake Rotor Drum System
1 Brake Disc/Drum Retaining Bolts
M6 x 1.0
1
Brake Disc/Drum Retaining Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the disc or drum is properly seated before torquing.
Wheel Attachment System
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Always use a torque wrench to ensure proper tightening.
Brake Hydraulic System
1 Brake Hose Banjo Bolt
M10 x 1.0
1
Brake Hose Banjo Bolt
M10 x 1.0
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the sealing washers are properly seated before torquing.
2 Brake Master Cylinder Mounting Bolts
M8 x 1.25
2
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the master cylinder is properly aligned before torquing.
3 Brake Booster Mounting Bolts
M8 x 1.25
3
Brake Booster Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the booster is properly aligned before torquing.
Brake Pedal System
1 Brake Pedal Assembly Bolts
M8 x 1.25
1
Brake Pedal Assembly Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the pedal assembly is properly aligned before torquing.
Abs System
1 ABS Sensor Mounting Bolts
M6 x 1.0
1
ABS Sensor Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the sensor is properly seated before torquing.
D6f Transmission
Torque specifications for D6f Transmission
D6f Transmission
Torque specifications for D6f Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Transmission Oil System
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Transmission Fluid Drain/Fill Plug
M12 x 1.5
2
Transmission Fluid Drain/Fill Plug
M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
3 Transmission Drain and Fill Plugs
M12 x 1.5
3
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Transmission Case and Valve Body
1 D6F Transmission Case Bolts
M16 x 1.5
1
D6F Transmission Case Bolts
M16 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m)
2. 50 ft-lbs (68 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's recommendations or a repair manual for the correct torque value.
2 D6F Transmission Valve Body Bolts
M14 x 1.5
2
D6F Transmission Valve Body Bolts
M14 x 1.5
Torque Specification
1. 20 ft-lbs (27 N·m)
2. 30 ft-lbs (41 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's recommendations or a repair manual for the correct torque value.
Transmission Filter and Cooler Lines
1 D6F Transmission Filter Bolts
M10 x 1.25
1
D6F Transmission Filter Bolts
M10 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's recommendations or a repair manual for the correct torque value.
2 D6F Transmission Cooler Line Fittings
M12 x 1.5
2
D6F Transmission Cooler Line Fittings
M12 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 25 ft-lbs (34 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's recommendations or a repair manual for the correct torque value.
D7f Transmission
Torque specifications for D7f Transmission
D7f Transmission
Torque specifications for D7f Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
These bolts secure the transmission to the engine block or transmission crossmember.
Transmission Case
1 Transmission Case Bolts
M12 x 1.25
1
Transmission Case Bolts
M12 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards for similar transmission cases.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M10 x 1.0
1
Transmission Oil Pan Bolts
M10 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
These bolts secure the oil pan to the transmission case.
Transmission Bellhousing
1 Transmission Bellhousing Bolts
M14 x 1.5
1
Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards for similar transmission bellhousings.
Transmission Crossmember
1 Transmission Crossmember Bolts
M16 x 1.5
1
Transmission Crossmember Bolts
M16 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on industry standards for similar transmission crossmembers.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M12 x 1.25
1
Transmission Drain and Fill Plugs
M12 x 1.25
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
These plugs allow for the transmission fluid to be drained and filled.
2 Transmission Fluid Drain/Fill Plug
M10 x 1.0
2
Transmission Fluid Drain/Fill Plug
M10 x 1.0
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
This plug is specific to the transmission fluid system.
3 Transmission Cooler Line Fittings
M10 x 1.0
3
Transmission Cooler Line Fittings
M10 x 1.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards for similar transmission cooler line fittings.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine and Transmission Mounting
1 Flywheel Bolts
M12 x 1.5
1
Flywheel Bolts
M12 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
Proper torque ensures the flywheel is properly seated and the engine's rotational energy is transferred to the transmission.
2 Transmission Mounting Bolts
M14 x 1.5
2
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
Proper torque ensures the transmission is properly aligned and supported.
Drive Axle and Half Shaft
1 Drive Axle/Half Shaft Bolts
M16 x 1.5
1
Drive Axle/Half Shaft Bolts
M16 x 1.5
Torque Specification
61 ft-lbs (83 N·m)
Important Notes
Proper torque ensures the axle shafts are properly seated and the drivetrain's rotational energy is transferred to the wheels.
2 CV Joint/Axle Nut
M20 x 1.5
2
CV Joint/Axle Nut
M20 x 1.5
Torque Specification
159 ft-lbs (216 N·m)
Important Notes
Proper torque ensures the CV joint is properly seated and the drivetrain's rotational energy is transferred to the wheels.
3 Drive Axle/Half Shaft Nut (for vehicles with a nut instead of a bolt)
M20 x 1.5
3
Drive Axle/Half Shaft Nut (for vehicles with a nut instead of a bolt)
M20 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Proper torque ensures the axle shaft is properly seated and the drivetrain's rotational energy is transferred to the wheels.
Propeller and Drive Shaft
1 Propeller/Drive Shaft Bolts
M10 x 1.5
1
Propeller/Drive Shaft Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque ensures the drive shaft is properly seated and the drivetrain's rotational energy is transferred to the wheels.
Transmission Oil Pan and Fluid Reservoir
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque ensures the oil pan is properly sealed and the transmission's lubrication system is maintained.
2 Transmission Drain and Fill Plugs
M12 x 1.5
2
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Proper torque ensures the plugs are properly sealed and the transmission's lubrication system is maintained.
Differential and Transfer Case
1 Differential Drain/Fill Plug
M12 x 1.5
1
Differential Drain/Fill Plug
M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Proper torque ensures the plug is properly sealed and the differential's lubrication system is maintained.
2 Transfer Case Drain/Fill Plug
M12 x 1.5
2
Transfer Case Drain/Fill Plug
M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Proper torque ensures the plug is properly sealed and the transfer case's lubrication system is maintained.
Engine Sensors and Solenoids
1 Crankshaft Position Sensor Bolt
M8 x 1.25
1
Crankshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque ensures the sensor is properly seated and the engine's rotational position is accurately detected.
2 Camshaft Position Sensor Bolt
M8 x 1.25
2
Camshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque ensures the sensor is properly seated and the engine's valve timing is accurately detected.
3 Transmission Solenoid Pack Bolt
M10 x 1.5
3
Transmission Solenoid Pack Bolt
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque ensures the solenoid pack is properly seated and the transmission's hydraulic control system is maintained.
Electric Engine
Torque specifications for ELECTRIC Engine
Electric Engine
Torque specifications for ELECTRIC Engine
Engine Mounting and Accessories
1 Starter Motor Mounting Bolts
M12 x 1.5
1
Starter Motor Mounting Bolts
M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Proper torque ensures secure attachment to the engine block, preventing damage or misalignment.
2 Alternator Mounting Bolts
M10 x 1.25
2
Alternator Mounting Bolts
M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque ensures secure attachment to the engine block, preventing damage or misalignment.
3 Electric Motor Mounting Bolts
M14 x 1.5
3
Electric Motor Mounting Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque ensures a secure attachment, preventing damage or misalignment.
4 Inverter Mounting Bolts
M12 x 1.25
4
Inverter Mounting Bolts
M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Proper torque ensures secure attachment to the vehicle's chassis or engine block, preventing damage or misalignment.
Electrical Connections
1 Battery Terminal Nuts
M8 x 1.25
1
Battery Terminal Nuts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque ensures a secure and reliable connection, preventing electrical issues or damage.
2 High-Voltage Cable Bolts
M10 x 1.25
2
High-Voltage Cable Bolts
M10 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Proper torque ensures a secure and reliable connection, preventing electrical issues or damage.
3 Electric Motor Control Unit (EMCU) Mounting Bolts
M8 x 1.25
3
Electric Motor Control Unit (EMCU) Mounting Bolts
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Proper torque ensures secure attachment to the vehicle's chassis or engine block, preventing damage or misalignment.
Cooling System
1 Electric Motor Cooling System Bolts
M10 x 1.25
1
Electric Motor Cooling System Bolts
M10 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Proper torque ensures a secure attachment, preventing leaks or damage.
Electric Transmission
Torque specifications for Electric Transmission
Electric Transmission
Torque specifications for Electric Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Transmission Oil System
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Transmission Drain and Fill Plugs
M12 x 1.5
2
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
3 Transmission Fluid Drain/Fill Plug
M12 x 1.5
3
Transmission Fluid Drain/Fill Plug
M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Electric Motor Mounting
1 Electric Motor Mounting Bolts
M16 x 1.5
1
Electric Motor Mounting Bolts
M16 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m)
2. 50 ft-lbs (68 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's documentation for the correct torque values.
Electric Motor Cooling System
1 Electric Motor Cooling System Bolts
M10 x 1.25
1
Electric Motor Cooling System Bolts
M10 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's documentation for the correct torque values.
Inverter Mounting
1 Inverter Mounting Bolts
M14 x 1.5
1
Inverter Mounting Bolts
M14 x 1.5
Torque Specification
1. 20 ft-lbs (27 N·m)
2. 30 ft-lbs (41 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's documentation for the correct torque values.
Electric Transmission Case
1 Electric Transmission Case Bolts
M16 x 1.5
1
Electric Transmission Case Bolts
M16 x 1.5
Torque Specification
1. 30 ft-lbs (41 N·m)
2. 40 ft-lbs (54 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's documentation for the correct torque values.
Electric Transmission Differential
1 Electric Transmission Differential Bolts
M18 x 1.5
1
Electric Transmission Differential Bolts
M18 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m)
2. 50 ft-lbs (68 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's documentation for the correct torque values.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Alternator
1 Alternator Mounting Bolts
M10 x 1.5
1
Alternator Mounting Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Starter Motor
1 Starter Motor Mounting Bolts
M12 x 1.75
1
Starter Motor Mounting Bolts
M12 x 1.75
Torque Specification
32 ft-lbs (43 N·m)
Battery
1 Battery Terminal Nuts
M8 x 1.25
1
Battery Terminal Nuts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Ignition Module
1 Ignition Module Mounting Bolts
M10 x 1.5
1
Ignition Module Mounting Bolts
M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value based on general industry guidelines. Consult vehicle manufacturer's recommendations for specific torque values.
Fuel Pump Electrical Connector
1 Fuel Pump Electrical Connector Bolts
M6 x 1.0
1
Fuel Pump Electrical Connector Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on general industry guidelines. Consult vehicle manufacturer's recommendations for specific torque values.
A/C Compressor Electrical Connector
1 A/C Compressor Electrical Connector Bolts
M6 x 1.0
1
A/C Compressor Electrical Connector Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on general industry guidelines. Consult vehicle manufacturer's recommendations for specific torque values.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Egr System
1 EGR Valve Bolts
M8 x 1.25
1
EGR Valve Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the EGR valve is properly aligned before tightening.
Exhaust Manifold
1 Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Use a crisscross pattern to ensure even pressure distribution.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the manifold is properly aligned before tightening.
Exhaust Pipe
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
Emissions Sensors
1 Oxygen Sensor (O2 Sensor) Mounting
M12 x 1.5
1
Oxygen Sensor (O2 Sensor) Mounting
M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on similar sensor mounting specifications.
2 NOx Sensor Mounting
M12 x 1.5
2
NOx Sensor Mounting
M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on similar sensor mounting specifications.
3 Exhaust Gas Temperature Sensor Mounting
M8 x 1.25
3
Exhaust Gas Temperature Sensor Mounting
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar sensor mounting specifications.
Diesel Particulate Filter
1 DPF Mounting Bolts
M10 x 1.5
1
DPF Mounting Bolts
M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Use a crisscross pattern to ensure even pressure distribution.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper torque sequence to avoid warping the manifold or headers.
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper torque sequence to avoid warping the manifold or headers.
Exhaust Pipe Connections
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper alignment before tightening.
2 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper alignment before tightening.
3 Muffler to Exhaust Pipe Bolts
M12 x 1.5
3
Muffler to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper alignment before tightening.
Exhaust Accessories
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on typical heat shield bolt sizes.
2 Exhaust Hanger Bolts
M8 x 1.25
2
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on typical hanger bolt sizes.
3 Oxygen Sensor (O2 Sensor) Mounting Bolts
M12 x 1.5
3
Oxygen Sensor (O2 Sensor) Mounting Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper alignment before tightening.
4 Exhaust Flange Bolts
M12 x 1.5
4
Exhaust Flange Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper alignment before tightening.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Delivery System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper alignment of the fuel rail before tightening.
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
3 Fuel Pump Mounting Bolts
M6 x 1.0
3
Fuel Pump Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the fuel pump is properly aligned with the fuel tank.
Fuel Storage System
1 Fuel Tank Strap Bolts
M10 x 1.5
1
Fuel Tank Strap Bolts
M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the fuel tank is properly positioned before tightening.
2 Fuel Filler Neck Bolts
M6 x 1.0
2
Fuel Filler Neck Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the filler neck is properly aligned with the fuel tank.
Fuel Filtration System
1 Fuel Filter Bolt/Nut
M8 x 1.25
1
Fuel Filter Bolt/Nut
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the fuel filter is properly seated before tightening.
High Pressure Fuel System
1 High-Pressure Fuel Pump Bolts
M8 x 1.25
1
High-Pressure Fuel Pump Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the pump before tightening.
2 Fuel Pressure Regulator Bolts
M6 x 1.0
2
Fuel Pressure Regulator Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Ensure the regulator is properly seated before tightening.
Fuel Line System
1 Fuel Line Fittings
M8 x 1.25
1
Fuel Line Fittings
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar components. Ensure fittings are properly aligned before tightening.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Ac Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.25
1
A/C Compressor Mounting Bolts
M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the compressor is properly aligned before tightening.
Ac Lines
1 A/C Line Fittings
M8 x 1.0
1
A/C Line Fittings
M8 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Use a torque wrench to avoid over-tightening, which can damage the fittings.
Evaporator
1 Evaporator Core Housing Bolts
M6 x 1.0
1
Evaporator Core Housing Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar small bolts in HVAC systems.
Blower Motor
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar small bolts in HVAC systems.
Heater Core
1 Heater Core Inlet/Outlet Fittings
M8 x 1.0
1
Heater Core Inlet/Outlet Fittings
M8 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the fittings are properly aligned to avoid leaks.
Hvac Case
1 HVAC Case Assembly Bolts
M6 x 1.0
1
HVAC Case Assembly Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar small bolts in HVAC systems.
Condenser
1 Condenser Mounting Bolts
M10 x 1.25
1
Condenser Mounting Bolts
M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the condenser is properly aligned before tightening.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Strut Shock Absorber
1 Strut/Shock Absorber Mounting Bolts
M10 x 1.25
1
Strut/Shock Absorber Mounting Bolts
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure bolts are tightened evenly to avoid misalignment.
2 Suspension Tower Bolts
M12 x 1.5
2
Suspension Tower Bolts
M12 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on typical suspension tower bolt specifications.
Control Arm
1 Control Arm Bolts
M14 x 1.5
1
Control Arm Bolts
M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
Important Notes
Ensure bolts are tightened evenly to avoid misalignment.
2 Ball Joint Nut
M12 x 1.25
2
Ball Joint Nut
M12 x 1.25
Torque Specification
43 ft-lbs (59 N·m)
Important Notes
Ensure the ball joint is properly seated before tightening.
Steering Linkage
1 Tie Rod End Nut
M10 x 1.25
1
Tie Rod End Nut
M10 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure the tie rod end is properly seated before tightening.
2 Steering Gear/Rack Bolts
M14 x 1.5
2
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
Important Notes
Ensure bolts are tightened evenly to avoid misalignment.
Sway Bar
1 Sway Bar Link Nut
M10 x 1.25
1
Sway Bar Link Nut
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the sway bar link is properly seated before tightening.
Suspension Brackets
1 Suspension Bracket Bolts
M12 x 1.5
1
Suspension Bracket Bolts
M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on typical suspension bracket bolt specifications.
Suspension Linkage
1 Suspension Linkage Bolts
M12 x 1.25
1
Suspension Linkage Bolts
M12 x 1.25
Torque Specification
55 ft-lbs (74 N·m)
Important Notes
Estimated value based on typical suspension linkage bolt specifications.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the torque specification for the lug nuts on a 2021 Hyundai Kona?
Q1
What IS the torque specification for the lug nuts on a 2021 Hyundai Kona?
108 ft-lbs (146 Nm)
Q2 What tools are required to properly torque the bolts on my 2018 Kona?
Q2
What tools are required to properly torque the bolts on my 2018 Kona?
A torque wrench, socket set, and appropriate size sockets for the bolts you are tightening.
Q3 How often should I check the torque on the bolts of my 2020 Kona?
Q3
How often should I check the torque on the bolts of my 2020 Kona?
Every 5,000 miles or 6 months, whichever comes first.
Q4 Can I use a lubricant or anti-seize when torquing the lug nuts?
Q4
Can I use a lubricant or anti-seize when torquing the lug nuts?
Yes, it IS recommended to apply a thin layer of anti-seize to the lug nuts to prevent them from seizing.
Q5 What are the consequences of over-torquing or under-torquing the bolts on my Kona?
Q5
What are the consequences of over-torquing or under-torquing the bolts on my Kona?
Over-torquing can damage the bolts or strip the threads, while under-torquing can cause the bolts to loosen and come loose.
Q6 Where can I find more detailed torque specifications for my specific Kona model?
Q6
Where can I find more detailed torque specifications for my specific Kona model?
Refer to the Hyundai service manual for your specific model year and trim level.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the kona.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Wheel Lug Nut Torque Specifications
Technical procedure for tightening wheel lug nuts to the correct torque on a Hyundai kona
- Clean the lug nut and wheel mating surface to remove dirt and debris.
- Apply a small amount of anti-seize compound to the lug nut threads.
- Tighten the lug nuts in a star pattern using a torque wrench to 100 Nm.
- Double-check the torque on each lug nut to ensure they are all properly tightened.
- Do not overtighten the lug nuts as this can damage the wheel or lug bolts.
Spark Plug Torque Specifications
Technical procedure for tightening spark plugs to the correct torque on a Hyundai kona
- Remove the ignition coil from the spark plug.
- Use a spark plug socket to carefully remove the spark plug.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Thread the new spark plug into the cylinder head by hand until it IS finger tight.
- Tighten the spark plug using a torque wrench to 25 Nm.
- Reinstall the ignition coil.
Technical Service Bulletins
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.