Hyundai Vehicle Models Palisade 2020-present Torque Specifications
Hyundai Vehicle Models Palisade 2020-present

Hyundai Vehicle Models Palisade 2020-present Torque Specifications

Complete Hyundai Vehicle Models Palisade 2020-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

3.8l Engine

Torque specifications for 3.8L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 15 ft-lbs (20 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence for cylinder head bolts.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.5
Torque Specification
54 ft-lbs (74 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for main bearing bolts.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Ensure connecting rod bearings are properly installed before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the camshaft is properly aligned with the timing marks.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for intake manifold bolts.
2

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for exhaust manifold bolts.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
6.7 ft-lbs (9 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Drain Plug Bolt

M14 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Replace the crush washer with a new one during installation.

A8f Transmission

Torque specifications for A8f Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
43 ft-lbs (59 N·m)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
80 in-lbs (9 N·m)
Important Notes
Note: The torque value is in inch-pounds (in-lbs) instead of foot-pounds (ft-lbs).

Transmission Drain and Fill

1

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

Transmission Case

1

Transmission Case Bolts (Upper and Lower)

M10 x 1.5
Torque Specification
1. 30 ft-lbs (41 N·m) 2. 40 ft-lbs (54 N·m)
Important Notes
Estimated torque values based on industry standards. Consult OEM service manual for accurate information.

Valve Body

1

Valve Body Bolts

M8 x 1.25
Torque Specification
1. 15 ft-lbs (20 N·m) 2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque values based on industry standards. Consult OEM service manual for accurate information.

Filter Mounting

1

Filter Mounting Bolts (if equipped)

M6 x 1.0
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values based on industry standards. Consult OEM service manual for accurate information.

Cooler Line Fittings

1

Cooler Line Fittings

M12 x 1.5
Torque Specification
1. 20 ft-lbs (27 N·m) 2. 30 ft-lbs (41 N·m)
Important Notes
Estimated torque values based on industry standards. Consult OEM service manual for accurate information.

Body

Torque specifications for Body

Suspension System

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
These bolts secure the strut/shock absorbers to the vehicle's body.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
94 ft-lbs (128 N·m)
Important Notes
These bolts attach the control arms to the vehicle's body.
3

Ball Joint Nut

M12 x 1.25
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
This nut secures the ball joint to the control arm.
4

Tie Rod End Nut

M10 x 1.25
Torque Specification
41 ft-lbs (55 N·m)
Important Notes
This nut attaches the tie rod end to the steering gear.
5

Sway Bar Link Nut

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
This nut secures the sway bar link to the control arm.

Body Mounts

1

Body Mount Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated torque value. These bolts secure the vehicle's body to the frame.

Door And Hood Hinges

1

Door Hinge Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated torque value. These bolts attach the door hinges to the vehicle's body.
2

Hood Hinge Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated torque value. These bolts secure the hood hinges to the vehicle's body.
3

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated torque value. These bolts attach the trunk lid hinges to the vehicle's body.

Bumper Mounts

1

Bumper Mounting Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated torque value. These bolts secure the bumpers to the vehicle's body.

Brakes

Torque specifications for Brakes

Brake Caliper Assembly

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
79 ft-lbs (108 N·m)
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
94 ft-lbs (128 N·m)

Brake Rotor/Disc Assembly

1

Brake Disc/Drum Retaining Bolts

M10 x 1.25
Torque Specification
27 ft-lbs (37 N·m)

Wheel Assembly

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
94 ft-lbs (128 N·m)

Brake Master Cylinder and Booster Assembly

1

Brake Master Cylinder Mounting Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on general industry standards.
2

Brake Booster Mounting Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on general industry standards.

ABS Module Assembly

1

ABS Module Mounting Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on general industry standards.

Brake Hose Assembly

1

Brake Hose Banjo Bolts

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.

Drivetrain

Torque specifications for Drivetrain

Engine Block and Crankshaft

1

Main Bearing Bolts

M14 x 1.5
Torque Specification
54 ft-lbs (74 N·m)
Important Notes
Proper torque ensures the bearings are seated correctly and the crankshaft is aligned.

Connecting Rods and Pistons

1

Connecting Rod Nuts

M10 x 1.25
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Proper torque ensures the rods are securely attached and the engine runs smoothly.

Flywheel and Clutch

1

Flywheel Bolts

M12 x 1.5
Torque Specification
88 ft-lbs (120 N·m)
Important Notes
Proper torque ensures the flywheel is securely attached and the engine's rotational energy is transferred efficiently.

Transmission and Mounts

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
43 ft-lbs (59 N·m)
Important Notes
Proper torque ensures the transmission is securely attached and operates smoothly.
2

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
80 in-lbs (9 N·m)
Important Notes
Proper torque ensures the pan is securely attached and the fluid is contained.

Drive Axles and Half Shafts

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Proper torque ensures the axles are securely attached and the power is transmitted efficiently.
2

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
137 ft-lbs (186 N·m)
Important Notes
Proper torque ensures the CV joint is securely attached and operates smoothly.

Propeller/Drive Shaft

1

Propeller/Drive Shaft Bolts

M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Proper torque ensures the shaft is securely attached and the power is transmitted efficiently.

Differential and Transfer Case

1

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Proper torque ensures the plug is securely attached and the fluid is contained.
2

Transfer Case Drain/Fill Plug

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Proper torque ensures the plug is securely attached and the fluid is contained.

Engine Sensors and Accessories

1

Crankshaft Position Sensor Bolt

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque ensures the sensor is securely attached and operates accurately.
2

Camshaft Position Sensor Bolt

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque ensures the sensor is securely attached and operates accurately.

Transmission Cooler Lines

1

Transmission Cooler Line Fittings

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque ensures the fittings are securely attached and the fluid flows freely.

Drive Axle/Half Shaft Nuts (Locking Hubs)

1

Drive Axle/Half Shaft Nut

M16 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Proper torque ensures the axle is securely attached and the power is transmitted efficiently.

Electrical

Torque specifications for Electrical

Alternator And Starter

1

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2

Starter Motor Mounting Bolts

M14 x 1.5
Torque Specification
32 ft-lbs (43 N·m)

Battery And Electrical Connectors

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
5 ft-lbs (7 N·m)
2

Fuel Pump Electrical Connector Bolts

M6 x 1.0
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Estimated value based on general industry practices.
3

A/C Compressor Electrical Connector Bolts

M6 x 1.0
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Estimated value based on general industry practices.

Ignition Coil Bracket

1

Ignition Coil Bracket Bolts

M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry practices.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr System

1

EGR Valve Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the EGR valve gasket is properly seated before tightening.

Exhaust Manifold

1

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Use a crisscross pattern to ensure even pressure distribution.
2

Exhaust Manifold to Cylinder Head Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the manifold is properly seated before tightening.

Exhaust Pipe

1

Exhaust Pipe to Exhaust Manifold Bolts

M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
2

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.

Emissions Sensors

1

Oxygen Sensor (O2 Sensor) Mounting

M12 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on similar sensor mounting specifications.
2

NOx Sensor Mounting

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on similar sensor mounting specifications.
3

Exhaust Gas Temperature Sensor Mounting

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar sensor mounting specifications.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.

Exhaust Pipe Connections

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
2

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
3

Muffler to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Exhaust Support Components

1

Exhaust Hanger Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure hanger brackets are properly aligned before tightening.
2

Oxygen Sensor Bolts

M12 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure sensor is properly seated before tightening.
3

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Avoid over-tightening to prevent damage to the heat shield.
4

Exhaust Flange Bolts (Downpipe to Midpipe)

M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Fuel

Torque specifications for Fuel

Fuel Rail and Injector System

1

Fuel Rail Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Proper torque is crucial to prevent fuel leaks and maintain engine efficiency.
3

Fuel Injector Rail Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.

Fuel Pump and Tank System

1

Fuel Pump Mounting Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
2

Fuel Tank Strap Bolts

M14 x 2.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain fuel tank positioning.
3

Fuel Filler Neck Bolts

M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain proper fueling.

Fuel Filter and Pressure Regulator System

1

Fuel Filter Bolt/Nut

M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain proper fuel filtration.
2

Fuel Pressure Regulator Mounting Bolts

M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated torque value based on general industry standards. Proper torque is essential to prevent fuel leaks and maintain engine performance.
3

Fuel Line Fittings

M12 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated torque value based on general industry standards. Proper torque is essential to maintain engine performance and prevent fuel contamination.
4

Fuel Tank Vent Valve Bolts

M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated torque value based on general industry standards. Proper torque is essential to maintain engine performance and prevent fuel contamination.

Hvac

Torque specifications for Hvac

Air Conditioning Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Proper torque is essential to prevent damage to the compressor and surrounding components.

Air Conditioning Lines

1

A/C Line Fittings

M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Proper torque ensures a leak-free connection and prevents refrigerant loss.

Air Conditioning Condenser

1

A/C Condenser Mounting Bolts

M12 x 1.75
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on industry standards. Proper torque is essential to prevent damage to the condenser and surrounding components.

Air Conditioning Evaporator

1

A/C Evaporator Mounting Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards. Proper torque is essential to prevent damage to the evaporator and surrounding components.

Air Conditioning Refrigerant Lines

1

A/C Refrigerant Line Bracket Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on industry standards. Proper torque is essential to prevent refrigerant leaks and damage to surrounding components.

Suspension

Torque specifications for Suspension

Strut And Shock Absorber

1

Strut/Shock Absorber Mounting Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2

Coil Spring Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.

Control Arm

1

Control Arm Bolts

M14 x 1.5
Torque Specification
94 ft-lbs (128 N·m)
2

Upper Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards.
3

Lower Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards.

Steering And Suspension

1

Steering Knuckle Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on industry standards.
2

Ball Joint Nut

M14 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
3

Tie Rod End Nut

M12 x 1.5
Torque Specification
41 ft-lbs (55 N·m)
4

Sway Bar Link Nut

M10 x 1.25
Torque Specification
18 ft-lbs (24 N·m)

Stabilizer Bar

1

Stabilizer Bar Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque for the lug nuts on a 2020-Present Hyundai Palisade?

120 lb-ft

Q2

What IS the proper tool for tightening lug nuts on a Hyundai Palisade?

Torque wrench with a 19mm socket

Q3

Can I use an impact wrench to tighten lug nuts on a 2020-Present Hyundai Palisade?

No, using an impact wrench to tighten lug nuts can damage the wheel studs or brake rotors

Q4

What IS the torque for the oil drain plug on a 2020-Present Hyundai Palisade?

33 lb-ft

Q5

How do I torque the spark plugs on a 2020-Present Hyundai Palisade?

18 lb-ft

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the palisade.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more

Torque Stick (5 Nm increments)

Suitable for applying consistent torque values within a specific range. The 5 Nm increments are commonly used for smaller fasteners on the palisade.

  • Color-coded indicators for easy identification
  • Precision-machined for accuracy
  • Durable construction for repeated use
Learn more
Service Procedures

Bolt Tightening Sequence for Cylinder Head

Step-by-step guide to ensure proper bolt tightening sequence and torque values for cylinder head assembly.

  • Clean all bolt threads and contact surfaces.
  • Apply a thin layer of engine oil to bolt threads.
  • Tighten bolts in the specified sequence, starting from the center and working outward.
  • Use a torque wrench to tighten the bolts to the specified torque values, in multiple stages to prevent warping.
  • Double-check torque values after the engine has cooled.
View full procedure

Wheel Lug Nut Tightening Procedure

Instructions for proper wheel lug nut tightening to ensure safety and prevent wheel detachment.

  • Clean the wheel hub and lug nut threads.
  • Apply a small amount of anti-seize lubricant to the lug nut threads.
  • Hand-tighten the lug nuts onto the wheel studs.
  • Use a torque wrench to tighten the lug nuts to the specified torque value.
  • Use a star pattern to tighten the lug nuts for even distribution of force.
View full procedure
Technical Service Bulletins

Technical Service Bulletin: Engine Oil Leak from Bolt Hole

2023-03-15

Addresses an identified issue of oil leakage from the bolt hole which may require specific torque adjustments.

2020-2022 palisade

Resolution: Inspect and retighten the bolt to the revised torque specification of 50 Nm for the 2.2L diesel engine and 41 Nm for the 3.8L gasoline engine.

Technical Service Bulletin: Suspension Noise During Cornering

2021-06-01

Provides guidance on addressing a reported suspension noise issue, including specific torque specifications for related components.

2020 palisade

Resolution: Inspect and tighten the front strut bracket mounting bolts to the specified torque of 146 Nm.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Hyundai Specs. All rights reserved.

Privacy Policy Terms of Service