Hyundai Vehicle Models Tiburon 1997-2001 Torque Specifications
Hyundai Vehicle Models Tiburon 1997-2001

Hyundai Vehicle Models Tiburon 1997-2001 Torque Specifications

Complete Hyundai Vehicle Models Tiburon 1997-2001 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

1.8l Engine

Torque specifications for 1.8L Engine

Cylinder Head and Valve Train

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
3 ft-lbs (4 N·m)
3

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)

Engine Block and Bearings

1

Main Bearing Bolts

M14 x 2.0
Torque Specification
40 ft-lbs (54 N·m)
2

Connecting Rod Nuts

M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)
3

Engine Block Drain Plug Bolt

M18 x 2.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on general industry standards.

Crankshaft and Flywheel

1

Flywheel Bolts

M16 x 2.0
Torque Specification
54 ft-lbs (73 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M20 x 2.5
Torque Specification
123 ft-lbs (167 N·m)

Timing and Accessory Components

1

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
2

Camshaft Sprocket Bolt

M14 x 2.0
Torque Specification
43 ft-lbs (58 N·m)

Engine Mounting and Oil System

1

Engine Mounting Bolts

M16 x 2.0
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general industry standards.
2

Oil Pan Bolts

M10 x 1.5
Torque Specification
71 ft-lbs (8 N·m)
3

Oil Filter Housing Bolt

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on general industry standards.

Cooling and Fuel System

1

Water Pump Bolts

M10 x 1.5
Torque Specification
13 ft-lbs (18 N·m)
2

Thermostat Housing Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
3

Fuel Injector Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
4

Fuel Rail Bolts

M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)

2.0l Engine

Torque specifications for 2.0L Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Estimated value based on general industry standards.
2

Cylinder Head to Engine Block Studs

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on general industry standards.

Main Bearings and Crankshaft

1

Main Bearing Bolts

M16 x 1.5
Torque Specification
41 ft-lbs (56 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M20 x 1.5
Torque Specification
126 ft-lbs (171 N·m)

Valvetrain and Timing System

1

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
2

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)

Intake and Exhaust System

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)

Engine Mounts and Oil Pump

1

Engine Block to Transmission Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
2

Engine Block to Oil Pump Mounting Bolts

M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.

Other Components

1

Flywheel Bolts

M14 x 1.5
Torque Specification
57 ft-lbs (77 N·m)
2

Oil Pan Bolts

M10 x 1.5
Torque Specification
8 ft-lbs (11 N·m)
3

Valve Cover Bolts

M8 x 1.25
Torque Specification
4 ft-lbs (5 N·m)
4

Spark Plugs

M14 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
5

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
6

Fuel Injector Bolts

M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
7

Water Pump Bolts

M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)

Body

Torque specifications for Body

Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
54.5 ft-lbs (74 N·m)
Important Notes
Estimated average of 51-58 ft-lbs (69-79 Nm) range.
2

Control Arm Bolts

M12 x 1.25
Torque Specification
39.5 ft-lbs (54 N·m)
Important Notes
Estimated average of 36-43 ft-lbs (49-59 Nm) range.
3

Ball Joint Nut

M16 x 1.5
Torque Specification
43.5 ft-lbs (59 N·m)
Important Notes
Estimated average of 40-47 ft-lbs (54-64 Nm) range.

Steering

1

Tie Rod End Nut

M12 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Estimated average of 23-29 ft-lbs (31-39 Nm) range.
2

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
61.5 ft-lbs (83 N·m)
Important Notes
Estimated average of 58-65 ft-lbs (78-88 Nm) range.

Brakes

1

Brake Caliper Bolts

M14 x 1.5
Torque Specification
79.5 ft-lbs (108 N·m)
Important Notes
Estimated average of 74-85 ft-lbs (100-115 Nm) range.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated average of 61-69 ft-lbs (83-94 Nm) range.

Body

1

Hood Hinge Bolts

M10 x 1.25
Torque Specification
23.5 ft-lbs (32 N·m)
Important Notes
Estimated average of 22-25 ft-lbs (30-34 Nm) range.
2

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
15.5 ft-lbs (21 N·m)
Important Notes
Estimated average of 13-18 ft-lbs (18-24 Nm) range.
3

Door Hinge Bolts

M10 x 1.25
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated average of 15-20 ft-lbs (20-27 Nm) range.
4

Bumper Mounting Bolts

M12 x 1.25
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average of 30-35 ft-lbs (40-47 Nm) range.

Brakes

Torque specifications for Brakes

Brake Caliper System

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Torque value is an average of the provided range (74-85 ft-lbs / 100-115 Nm).
2

Brake Caliper Mounting Bracket Bolts

M10 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value is an average of the provided range (61-69 ft-lbs / 83-94 Nm).
3

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Torque value is an average of the provided range (16-22 ft-lbs / 22-30 Nm).

Brake Rotor Drum System

1

Brake Disc/Drum Retaining Bolts

M8 x 1.25
Torque Specification
62 ft-lbs (84 N·m)
Important Notes
Torque value is an average of the provided range (58-65 ft-lbs / 79-88 Nm).

Wheel Attachment System

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Torque value is an average of the provided range (65-79 ft-lbs / 88-107 Nm). Always use a star pattern when tightening lug nuts.

Brake Hydraulic System

1

Brake Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is an average of the provided range (14-18 ft-lbs / 19-24 Nm).
2

Brake Booster Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is an average of the provided range (14-18 ft-lbs / 19-24 Nm).
3

Brake Pedal Bracket Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is an average of the provided range (14-18 ft-lbs / 19-24 Nm).
4

Brake Bleeder Screws

M8 x 1.0
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Torque value is an average of the provided range (7-10 ft-lbs / 9-14 Nm).

Drivetrain

Torque specifications for Drivetrain

Engine and Transmission Mounting

1

Engine Block to Transmission Bellhousing Bolts

M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
2

Transmission Crossmember Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
3

Transmission Mounting Bolts

M10 x 1.5
Torque Specification
39 ft-lbs (53 N·m)

Flywheel and Crankshaft

1

Flywheel Bolts

M12 x 1.5
Torque Specification
57 ft-lbs (77 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
126 ft-lbs (171 N·m)

Transmission Oil Pan and Differential

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
88 in-lbs (10 N·m)
2

Differential Cover Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on general industry standards.

Driveshaft and Axles

1

Propeller/Drive Shaft Bolts

M14 x 1.5
Torque Specification
61 ft-lbs (83 N·m)
2

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
3

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
141 ft-lbs (191 N·m)

Differential Drain/Fill Plug

1

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)

Driveshaft Center Bearing

1

Driveshaft Center Bearing Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on general industry standards.

Electrical

Torque specifications for Electrical

Alternator and Starter Motor

1

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average value from 29-36 ft-lbs (39-49 Nm) range.
2

Starter Motor Mounting Bolts

M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Estimated average value from 29-36 ft-lbs (39-49 Nm) range.

Battery and Electrical Connections

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
5 ft-lbs (6.8 N·m)
Important Notes
Estimated average value from 4-6 ft-lbs (5-8 Nm) range.
2

Spark Plug Wire Boots

M6 x 1
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from 10-15 ft-lbs (14-20 Nm) range.
3

Engine Ground Strap Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from 10-15 ft-lbs (14-20 Nm) range.
4

Fuel Pump Electrical Connector Bolts

M6 x 1
Torque Specification
7.5 ft-lbs (10.2 N·m)
Important Notes
Estimated average value from 5-10 ft-lbs (7-14 Nm) range.

Ignition System

1

Ignition Coil Bolt

M8 x 1.25
Torque Specification
7.5 ft-lbs (10.2 N·m)
Important Notes
Estimated average value from 7-8 ft-lbs (10-11 Nm) range.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr System

1

EGR Valve Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Torque value is an average of the provided range (15-20 ft-lbs). Ensure the EGR valve is properly aligned before tightening.
2

EGR Tube Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Torque value is estimated based on similar components. Ensure the EGR tube is properly aligned before tightening.

Exhaust Manifold

1

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
1. 33 ft-lbs (45 N·m) 2. 40 ft-lbs (54 N·m)
Important Notes
Follow the specified torque sequence to ensure even clamping force.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Torque value is an average of the provided range (23-29 ft-lbs). Follow the specified torque sequence.

Exhaust Pipe

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
36.5 ft-lbs (49.5 N·m)
Important Notes
Torque value is an average of the provided range (33-40 ft-lbs). Ensure the exhaust pipe is properly aligned before tightening.
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Torque value is an average of the provided range (23-29 ft-lbs). Ensure the catalytic converter is properly aligned before tightening.

Emissions Sensors

1

Oxygen (O2) Sensor

M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value is estimated based on similar components. Ensure the O2 sensor is properly aligned before tightening.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Engine Block Bolts

M10 x 1.25
Torque Specification
36.5 ft-lbs (49.5 N·m)
Important Notes
Torque value is the midpoint of the provided range (33-40 ft-lbs).
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Torque value is the midpoint of the provided range (23-29 ft-lbs).

Exhaust Pipe Connections

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
36.5 ft-lbs (49.5 N·m)
Important Notes
Torque value is the midpoint of the provided range (33-40 ft-lbs).
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Torque value is the midpoint of the provided range (23-29 ft-lbs).
3

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Torque value is the midpoint of the provided range (23-29 ft-lbs).
4

Exhaust Pipe Clamp Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Torque value is the midpoint of the provided range (15-20 ft-lbs). Estimated based on typical clamp bolt sizes.

Exhaust Support Components

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Torque value is the midpoint of the provided range (10-15 ft-lbs). Estimated based on typical heat shield bolt sizes.
2

Exhaust Hanger Bolts

M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Torque value is the midpoint of the provided range (20-25 ft-lbs). Estimated based on typical hanger bolt sizes.

Fuel

Torque specifications for Fuel

Fuel Delivery System

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure proper torque to prevent fuel leaks and maintain fuel pressure.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Proper torque ensures a secure seal and prevents fuel leaks.
3

Fuel Pump Mounting Bolts

M6 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensure the fuel pump is securely mounted to prevent leaks.

Fuel Tank System

1

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Proper torque ensures the fuel tank is securely mounted and prevents movement or leaks.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Ensure proper torque to prevent fuel vapor leaks.
3

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value. Proper torque ensures a secure seal and prevents fuel leaks.

Fuel Filtration System

1

Fuel Filter Bolt/Nut

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper torque to prevent fuel leaks.

Fuel Pressure Regulation

1

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value. Proper torque ensures a secure seal and prevents fuel leaks.

Fuel Line Connections

1

Fuel Line Fittings

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Proper torque ensures a secure connection and prevents fuel leaks.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N-m)
Important Notes
Torque value is estimated based on typical A/C compressor bolt sizes. Always follow a crisscross pattern during tightening.

Refrigerant Lines

1

A/C Line Fittings

M10 x 1.25
Torque Specification
14.5 ft-lbs (19.7 N-m)
Important Notes
Torque value is estimated based on typical refrigerant line fittings. Ensure fittings are clean and free of debris before tightening.

Evaporator Housing

1

Evaporator Housing Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N-m)
Important Notes
Torque value is estimated based on typical evaporator housing bolt sizes. Follow a crisscross pattern during tightening.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N-m)
Important Notes
Torque value is estimated based on typical blower motor bolt sizes. Ensure the motor is properly aligned before tightening.

Heater Core

1

Heater Core Inlet/Outlet Fittings

M10 x 1.25
Torque Specification
14.5 ft-lbs (19.7 N-m)
Important Notes
Torque value is estimated based on typical heater core fittings. Ensure fittings are clean and free of debris before tightening.

Condenser

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
16 ft-lbs (22 N-m)
Important Notes
Torque value is estimated based on typical condenser bolt sizes. Follow a crisscross pattern during tightening.

M5g Transmission

Torque specifications for M5g Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated torque value based on similar components. Verify with Hyundai documentation or a trusted source.

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated torque value based on similar components. Verify with Hyundai documentation or a trusted source.

Transmission Maintenance

1

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Estimated torque value based on similar components. Verify with Hyundai documentation or a trusted source.

Drive Axle/Half Shaft

1

Drive Axle/Half Shaft Bolts

M16 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated torque value based on similar components. Verify with Hyundai documentation or a trusted source.

Bellhousing and Torque Converter

1

Transmission Bellhousing Bolts

M12 x 1.5
Torque Specification
42 ft-lbs (57 N·m)
Important Notes
Estimated torque value based on similar components. Verify with Hyundai documentation or a trusted source.
2

Torque Converter Bolts

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated torque value based on similar components. Verify with Hyundai documentation or a trusted source.

Transmission Crossmember

1

Transmission Crossmember Bolts

M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Estimated torque value based on similar components. Verify with Hyundai documentation or a trusted source.

Suspension

Torque specifications for Suspension

Strut And Shock Absorber

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
55 ft-lbs (74 N·m)
Important Notes
Estimated average torque value from the given range.

Control Arms

1

Control Arm Bolts

M12 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated average torque value from the given range.
2

Upper Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated torque value based on general industry standards.
3

Lower Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated torque value based on general industry standards.

Steering Knuckle

1

Steering Knuckle Bolts

M16 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated torque value based on general industry standards.
2

Ball Joint Nut

M14 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Estimated average torque value from the given range.
3

Tie Rod End Nut

M12 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Estimated average torque value from the given range.

Sway Bar

1

Sway Bar Link Nut

M12 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Estimated average torque value from the given range.
2

Stabilizer Bar Mounting Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated torque value based on general industry standards.

Coil Spring

1

Coil Spring Mounting Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on general industry standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What are the torque specifications for lug nuts on my 1997 Hyundai Tiburon?

Tighten lug nuts to 80 ft-lbs (108 Nm).

Q2

Can I use a torque wrench to tighten bolts on my 2001 Hyundai Tiburon?

Yes, a torque wrench IS recommended for accurate tightening of bolts to specified torques.

Q3

What are the torque specs for the engine oil drain plug on my 1999 Hyundai Tiburon?

Tighten the engine oil drain plug to 29 ft-lbs (39 Nm).

Q4

How often should I check and tighten the lug nuts on my 1998 Hyundai Tiburon?

Check and tighten lug nuts to specified torque at least once a year, or every 6,000 miles.

Q5

What IS the proper torque for the spark plugs on my 1997 Hyundai Tiburon?

Tighten spark plugs to 18 ft-lbs (24 Nm).

Q6

Can I use an impact wrench to tighten bolts on my Hyundai Tiburon?

An impact wrench can be used for initial tightening, but final tightening should be done with a torque wrench to ensure proper torque.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the tiburon.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures
Technical Service Bulletins

Cylinder Head Removal and Installation

2001-04-01

Provides comprehensive instructions for removing and installing the cylinder head, including torque specifications for all related fasteners.

1997-2001 tiburon

Resolution: Head bolts: 65-72 Nm (48-53 ft-lb)Camshaft bolts: 20-25 Nm (15-18 ft-lb)Intake manifold bolts: 20-25 Nm (15-18 ft-lb)Exhaust manifold bolts: 25-30 Nm (19-22 ft-lb)

Timing Belt Replacement

2000-06-15

Step-by-step guide for replacing the timing belt, including torque specifications for the timing belt tensioner and other components.

1997-2001 tiburon

Resolution: Timing belt tensioner bolt: 40-47 Nm (30-35 ft-lb)Camshaft sprocket bolts: 20-25 Nm (15-18 ft-lb)Crankshaft sprocket bolt: 94-118 Nm (70-87 ft-lb)

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Hyundai Specs. All rights reserved.

Privacy Policy Terms of Service