Hyundai Vehicle Models Venue 2020-present
Hyundai Vehicle Models Venue 2020-present Torque Specifications
Complete Hyundai Vehicle Models Venue 2020-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
1.6l Engine
Torque specifications for 1.6L Engine
1.6l Engine
Torque specifications for 1.6L Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35.3 N·m)
2 Main Bearing Bolts
M14 x 1.5
2
Main Bearing Bolts
M14 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Crankshaft and Connecting Rods
1 Connecting Rod Nuts
M12 x 1.5
1
Connecting Rod Nuts
M12 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
2 Flywheel Bolts
M14 x 1.5
2
Flywheel Bolts
M14 x 1.5
Torque Specification
94 ft-lbs (127.3 N·m)
Valvetrain and Timing System
1 Camshaft Sprocket Bolt
M12 x 1.5
1
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
47 ft-lbs (63.7 N·m)
2 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)
Engine Accessories and Mounts
1 Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
1
Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
Torque Specification
94 ft-lbs (127.3 N·m)
2 Engine Mounting Bolts
M12 x 1.5
2
Engine Mounting Bolts
M12 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Estimated value based on industry standards.
Intake and Exhaust System
1 Throttle Body Bolts
M10 x 1.5
1
Throttle Body Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)
2 Intake Manifold Bolts
M10 x 1.5
2
Intake Manifold Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (21.7 N·m)
Fuel System
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (21.7 N·m)
2 Fuel Injector Bolts
M10 x 1.5
2
Fuel Injector Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (21.7 N·m)
Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20.3 N·m)
2 Ignition Coil Bolt
M10 x 1.5
2
Ignition Coil Bolt
M10 x 1.5
Torque Specification
7.2 ft-lbs (9.8 N·m)
Cooling System
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
7.2 ft-lbs (9.8 N·m)
Engine Sensors and Accessories
1 Crankshaft Position Sensor Bolt
M10 x 1.5
1
Crankshaft Position Sensor Bolt
M10 x 1.5
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Estimated value based on industry standards.
2 Camshaft Position Sensor Bolt
M10 x 1.5
2
Camshaft Position Sensor Bolt
M10 x 1.5
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Estimated value based on industry standards.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension and Steering
1 Strut/Shock Absorber Mounting Bolts
M12 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M12 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
2 Control Arm Bolts
M14 x 1.5
2
Control Arm Bolts
M14 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
3 Steering Gear/Rack Bolts
M12 x 1.5
3
Steering Gear/Rack Bolts
M12 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Brake System
1 Brake Caliper Bolts
M10 x 1.5
1
Brake Caliper Bolts
M10 x 1.5
Torque Specification
23 ft-lbs (31.2 N·m)
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Wheels and Tires
1 Wheel Lug Nuts
M14 x 1.5
1
Wheel Lug Nuts
M14 x 1.5
Torque Specification
80 ft-lbs (108.5 N·m)
Body Panels and Trim
1 Body Panel Fasteners (e.g., hood, trunk, doors)
M8 x 1.25
1
Body Panel Fasteners (e.g., hood, trunk, doors)
M8 x 1.25
Torque Specification
12.5 ft-lbs (16.9 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
2 Bumper Mounting Bolts
M10 x 1.5
2
Bumper Mounting Bolts
M10 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
3 Door Hinge Bolts
M8 x 1.25
3
Door Hinge Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
4 Trunk Lid Hinge Bolts
M8 x 1.25
4
Trunk Lid Hinge Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper and Mounting
1 Brake Caliper Bolts
M12 x 1.5
1
Brake Caliper Bolts
M12 x 1.5
Torque Specification
23 ft-lbs (31.2 N·m)
2 Brake Caliper Mounting Bracket Bolts
M14 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M14 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Brake Disc/Drum and Rotor
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
52 ft-lbs (70.5 N·m)
2 Brake Rotor Bolts (if applicable)
M12 x 1.5
2
Brake Rotor Bolts (if applicable)
M12 x 1.5
Torque Specification
1. 30 ft-lbs (40.7 N·m)
2. 40 ft-lbs (54.2 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's recommendations for specific torque specification.
Wheel and Lug Nuts
1 Wheel Lug Nuts
M14 x 1.5
1
Wheel Lug Nuts
M14 x 1.5
Torque Specification
80 ft-lbs (108.5 N·m)
Brake Master Cylinder and Lines
1 Brake Master Cylinder Mounting Bolts
M10 x 1.25
1
Brake Master Cylinder Mounting Bolts
M10 x 1.25
Torque Specification
1. 15 ft-lbs (20.3 N·m)
2. 20 ft-lbs (27.1 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's recommendations for specific torque specification.
2 Brake Line Fittings
M8 x 1.25
2
Brake Line Fittings
M8 x 1.25
Torque Specification
1. 10 ft-lbs (13.6 N·m)
2. 15 ft-lbs (20.3 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's recommendations for specific torque specification.
ABS Sensors
1 ABS Sensor Bolts (if applicable)
M6 x 1.0
1
ABS Sensor Bolts (if applicable)
M6 x 1.0
Torque Specification
1. 5 ft-lbs (6.8 N·m)
2. 10 ft-lbs (13.6 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's recommendations for specific torque specification.
D7f Transmission
Torque specifications for D7f Transmission
D7f Transmission
Torque specifications for D7f Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Transmission Oil System
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
7.2 ft-lbs (9.8 N·m)
2 Transmission Drain and Fill Plugs
M12 x 1.5
2
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
29 ft-lbs (39.3 N·m)
Transmission Case and Valve Body
1 D7F Transmission Case Bolts
M16 x 1.5
1
D7F Transmission Case Bolts
M16 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Estimated value based on industry standards.
2 D7F Transmission Valve Body Bolts
M12 x 1.25
2
D7F Transmission Valve Body Bolts
M12 x 1.25
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Estimated value based on industry standards.
Transmission Filter and Cooler
1 D7F Transmission Filter Bolts
M10 x 1.25
1
D7F Transmission Filter Bolts
M10 x 1.25
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Estimated value based on industry standards.
2 D7F Transmission Cooler Line Fittings
M12 x 1.5
2
D7F Transmission Cooler Line Fittings
M12 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Estimated value based on industry standards.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine and Transmission Interface
1 Flywheel Bolts
M12 x 1.5
1
Flywheel Bolts
M12 x 1.5
Torque Specification
94 ft-lbs (127.3 N·m)
Important Notes
Proper torque is essential to prevent damage to the flywheel, crankshaft, and transmission.
2 Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
Torque Specification
94 ft-lbs (127.3 N·m)
Important Notes
Proper torque is crucial to maintain the engine's balance and prevent damage to the crankshaft.
3 Engine Block to Transmission Bellhousing Bolts
M10 x 1.5
3
Engine Block to Transmission Bellhousing Bolts
M10 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Important Notes
Proper torque is necessary to prevent engine block movement and damage to the transmission.
Transmission and Transfer Case
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Important Notes
Proper torque is necessary to prevent transmission movement and damage.
2 Transmission Oil Pan Bolts
M8 x 1.25
2
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Proper torque is essential to prevent oil leaks and damage to the transmission.
3 Transfer Case Mounting Bolts
M12 x 1.5
3
Transfer Case Mounting Bolts
M12 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Important Notes
Proper torque is necessary to prevent transfer case movement and damage.
Driveshaft and Axles
1 Driveshaft Bolts
M14 x 1.5
1
Driveshaft Bolts
M14 x 1.5
Torque Specification
56 ft-lbs (75.9 N·m)
Important Notes
Proper torque is necessary to prevent driveshaft movement and damage.
2 Axle/Half Shaft Bolts
M12 x 1.5
2
Axle/Half Shaft Bolts
M12 x 1.5
Torque Specification
51 ft-lbs (69.1 N·m)
Important Notes
Proper torque is necessary to prevent axle/half shaft movement and damage.
3 CV Joint/Axle Nut
M16 x 1.5
3
CV Joint/Axle Nut
M16 x 1.5
Torque Specification
152 ft-lbs (206.2 N·m)
Important Notes
Proper torque is essential to prevent CV joint damage and maintain proper axle/half shaft alignment.
Differential and Transfer Case Fluid
1 Differential Drain/Fill Plug
M12 x 1.5
1
Differential Drain/Fill Plug
M12 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Proper torque is essential to prevent oil leaks and damage to the differential.
2 Transfer Case Drain/Fill Plug
M12 x 1.5
2
Transfer Case Drain/Fill Plug
M12 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Proper torque is essential to prevent oil leaks and damage to the transfer case.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Ignition System
1 Ignition Coil Bolt
M8 x 1.25
1
Ignition Coil Bolt
M8 x 1.25
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Secure the ignition coil to the engine block.
Starting System
1 Starter Motor Mounting Bolt
M12 x 1.5
1
Starter Motor Mounting Bolt
M12 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Secure the starter motor to the engine block.
Charging System
1 Alternator Mounting Bolt
M12 x 1.5
1
Alternator Mounting Bolt
M12 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Secure the alternator to the engine block.
Battery and Electrical Connections
1 Battery Terminal Nut
M6 x 1
1
Battery Terminal Nut
M6 x 1
Torque Specification
5.4 ft-lbs (7.3 N·m)
Important Notes
Secure the battery cables to the battery terminals.
2 Ground Strap Bolt
M8 x 1.25
2
Ground Strap Bolt
M8 x 1.25
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Estimated value. Secure the ground strap to the engine block and vehicle frame.
Sensors and Electronics
1 Sensor Mounting Bolt
M6 x 1
1
Sensor Mounting Bolt
M6 x 1
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Estimated value. Secure the sensor to the engine block or cylinder head.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Exhaust Manifold And Headers
1 Exhaust Manifold/Headers Bolts
M10 x 1.25
1
Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35.3 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35.3 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
Exhaust Pipe And Catalytic Converter
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35.3 N·m)
Important Notes
Ensure proper alignment before tightening.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35.3 N·m)
Important Notes
Ensure proper alignment before tightening.
3 Catalytic Converter Heat Shield Bolts
M6 x 1.0
3
Catalytic Converter Heat Shield Bolts
M6 x 1.0
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Ensure heat shield is properly aligned before tightening.
Emissions Sensors
1 Oxygen (O2) Sensor Mounting Nut
M18 x 1.5
1
Oxygen (O2) Sensor Mounting Nut
M18 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Ensure sensor is properly seated before tightening.
2 Downstream Oxygen Sensor Mounting Nut
M18 x 1.5
2
Downstream Oxygen Sensor Mounting Nut
M18 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Ensure sensor is properly seated before tightening.
3 Exhaust Gas Temperature (EGT) Sensor Mounting Bolt
M8 x 1.25
3
Exhaust Gas Temperature (EGT) Sensor Mounting Bolt
M8 x 1.25
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Ensure sensor is properly seated before tightening.
Egr System
1 EGR Valve Bolts
M8 x 1.25
1
EGR Valve Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35.3 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
2
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35.3 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
Catalytic Converter
1 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
1
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35.3 N·m)
Important Notes
Use a new gasket to ensure a proper seal.
Muffler
1 Muffler to Exhaust Pipe Bolts
M10 x 1.25
1
Muffler to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35.3 N·m)
Important Notes
Ensure the muffler is properly aligned before tightening.
Exhaust Hangers
1 Exhaust Hanger Bolts
M8 x 1.25
1
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Ensure the exhaust system is properly aligned before tightening.
Oxygen Sensors
1 Oxygen Sensor Bolts
M12 x 1.25
1
Oxygen Sensor Bolts
M12 x 1.25
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Ensure the sensor is properly seated before tightening.
Heat Shields
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Ensure heat shields are properly aligned before tightening.
Exhaust Flanges
1 Exhaust Flange Bolts
M10 x 1.25
1
Exhaust Flange Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35.3 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail and Injectors
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (21.7 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
2 Fuel Injector Bolts
M10 x 1.5
2
Fuel Injector Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (21.7 N·m)
Important Notes
Incorrect torque can lead to poor engine performance, decreased fuel efficiency, and potential engine damage.
3 Fuel Injector O-Ring or Gasket Bolts
M6 x 1.0
3
Fuel Injector O-Ring or Gasket Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8.1 N·m)
Important Notes
Estimated value. Proper torque is essential to maintain fuel injector performance and prevent engine damage.
Fuel Pump and Filter
1 Fuel Pump Mounting Bolts
M12 x 1.5
1
Fuel Pump Mounting Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
2 Fuel Filter Bolt/Nut
M14 x 1.5
2
Fuel Filter Bolt/Nut
M14 x 1.5
Torque Specification
25 ft-lbs (33.9 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
3 Fuel Pump Electrical Connector Bolts
M6 x 1.0
3
Fuel Pump Electrical Connector Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8.1 N·m)
Important Notes
Estimated value. Proper torque is essential to maintain fuel pump performance and prevent engine damage.
Fuel Tank and Filler Neck
1 Fuel Tank Strap Bolts
M14 x 1.5
1
Fuel Tank Strap Bolts
M14 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Proper torque is essential to maintain fuel tank integrity and prevent damage.
2 Fuel Filler Neck Bolts
M8 x 1.25
2
Fuel Filler Neck Bolts
M8 x 1.25
Torque Specification
7.2 ft-lbs (9.8 N·m)
Important Notes
Proper torque is essential to maintain a secure connection and prevent fuel leaks.
Fuel Pressure Regulator
1 Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
1
Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Estimated value. Proper torque is essential to ensure proper fuel pressure regulation and prevent fuel system damage.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Compressor Subsystem
1 A/C Compressor Mounting Bolts
M10 x 1.25
1
A/C Compressor Mounting Bolts
M10 x 1.25
Torque Specification
18 ft-lbs (24.4 N-m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
2 A/C Line Fittings
M12 x 1.5
2
A/C Line Fittings
M12 x 1.5
Torque Specification
N/A
Important Notes
Hand-tighten only. Over-tightening can damage fittings and cause refrigerant leaks.
Evaporator Subsystem
1 Evaporator Housing Bolts
M6 x 1.0
1
Evaporator Housing Bolts
M6 x 1.0
Torque Specification
7.2 ft-lbs (9.8 N-m)
Important Notes
Ensure housing is properly sealed to prevent air leaks.
Blower Motor Subsystem
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
7.2 ft-lbs (9.8 N-m)
Important Notes
Ensure motor is securely mounted to prevent vibrations.
Heater Core Subsystem
1 Heater Core Inlet/Outlet Fittings
M12 x 1.5
1
Heater Core Inlet/Outlet Fittings
M12 x 1.5
Torque Specification
N/A
Important Notes
Hand-tighten only. Over-tightening can damage fittings and cause coolant leaks.
Condenser Subsystem
1 Condenser Mounting Bolts
M6 x 1.0
1
Condenser Mounting Bolts
M6 x 1.0
Torque Specification
7.2 ft-lbs (9.8 N-m)
Important Notes
Ensure condenser is securely mounted to prevent damage from vibrations.
Expansion Valve Subsystem
1 Expansion Valve Bolts
M6 x 1.0
1
Expansion Valve Bolts
M6 x 1.0
Torque Specification
7.2 ft-lbs (9.8 N-m)
Important Notes
Ensure expansion valve is securely mounted to prevent refrigerant leaks.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Important Notes
Secure the strut/shock absorber to the vehicle's frame.
2 Control Arm Bolts
M14 x 1.5
2
Control Arm Bolts
M14 x 1.5
Torque Specification
46 ft-lbs (62.3 N·m)
Important Notes
Secure the control arm to the vehicle's frame.
3 Upper Control Arm Bushing Bolts
M12 x 1.25
3
Upper Control Arm Bushing Bolts
M12 x 1.25
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
Estimated value based on general industry standards.
4 Lower Control Arm Bushing Bolts
M12 x 1.25
4
Lower Control Arm Bushing Bolts
M12 x 1.25
Torque Specification
40 ft-lbs (54.2 N·m)
Important Notes
Estimated value based on general industry standards.
5 Steering Knuckle Bolts
M16 x 1.5
5
Steering Knuckle Bolts
M16 x 1.5
Torque Specification
70 ft-lbs (94.9 N·m)
Important Notes
Estimated value based on general industry standards.
Steering System
1 Tie Rod End Nut
M12 x 1.25
1
Tie Rod End Nut
M12 x 1.25
Torque Specification
29 ft-lbs (39.3 N·m)
Important Notes
Secure the tie rod end to the steering knuckle.
2 Sway Bar Link Nut
M12 x 1.25
2
Sway Bar Link Nut
M12 x 1.25
Torque Specification
29 ft-lbs (39.3 N·m)
Important Notes
Secure the sway bar link to the sway bar.
Spring and Shock Absorber
1 Coil Spring Mounting Bolts
M14 x 1.5
1
Coil Spring Mounting Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (40.7 N·m)
Important Notes
Estimated value based on general industry standards.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the torque specification for the front wheel lug nuts?
Q1
What IS the torque specification for the front wheel lug nuts?
Tighten the front wheel lug nuts to 118 ft-lbs (160 Nm).
Q2 What IS the torque specification for the rear wheel lug nuts?
Q2
What IS the torque specification for the rear wheel lug nuts?
Tighten the rear wheel lug nuts to 118 ft-lbs (160 Nm).
Q3 How often should I check the torque on my vehicle's bolts and nuts?
Q3
How often should I check the torque on my vehicle's bolts and nuts?
It IS recommended to check the torque on all critical bolts and nuts after every 5,000 miles or 6 months, whichever comes first.
Q4 What are the recommended tools and techniques for applying torque?
Q4
What are the recommended tools and techniques for applying torque?
Always use a properly calibrated torque wrench and follow the manufacturer's instructions. Apply torque smoothly and evenly, avoiding sudden or excessive force.
Q5 What are the consequences of over-tightening or under-tightening bolts?
Q5
What are the consequences of over-tightening or under-tightening bolts?
Over-tightening can damage bolts, nuts, and components. Under-tightening can lead to loose connections, premature wear, and potential failure.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the venue.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Bolt Tightening Sequence for Hyundai venue
Technical procedure for maintaining proper bolt tension and preventing loosening.
- Tighten bolts in a star pattern, working from the center outwards.
- Apply specified torque to each bolt using a torque wrench.
- Recheck torque after 500 miles or one month, whichever comes first.
Technical Service Bulletins
Torque Specification Update for 2020-Present venue
2023-06-01Updates torque specifications for various components on the 2020-Present venue.
2020-Present venue
Resolution: Refer to the updated torque specifications in the latest service manual or contact an authorized Hyundai dealer.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.