Hyundai Vehicle Models Veracruz 2007-2012 Torque Specifications
Hyundai Vehicle Models Veracruz 2007-2012

Hyundai Vehicle Models Veracruz 2007-2012 Torque Specifications

Complete Hyundai Vehicle Models Veracruz 2007-2012 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

3.8l Engine

Torque specifications for 3.8L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 18 ft-lbs (24 N·m) 2. 22 ft-lbs (30 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.5
Torque Specification
68 ft-lbs (92 N·m)
Important Notes
Follow the manufacturer's torque sequence to ensure proper crankshaft alignment.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper alignment of connecting rods before tightening.
3

Flywheel Bolts

M12 x 1.5
Torque Specification
79 ft-lbs (107 N·m)
Important Notes
Ensure the flywheel is properly seated before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Ensure proper alignment of the camshaft sprocket before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Drain Plug Bolt

M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Replace the crush washer to ensure proper sealing.

A6f Transmission

Torque specifications for A6f Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, consult manufacturer's repair manual for specific torque values.

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
9 ft-lbs (12 N·m)

Transmission Fluid System

1

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2

Transmission Fluid Drain/Fill Plug

M10 x 1.25
Torque Specification
32 ft-lbs (43 N·m)

Transmission Case

1

A6F Transmission Case Bolts

M16 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value, consult manufacturer's repair manual for specific torque values.

Transmission Valve Body

1

A6F Transmission Valve Body Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value, consult manufacturer's repair manual for specific torque values.

Transmission Filter

1

A6F Transmission Filter Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value, consult manufacturer's repair manual for specific torque values.

Transmission Cooler Lines

1

A6F Transmission Cooler Line Fittings

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value, consult manufacturer's repair manual for specific torque values.

Body

Torque specifications for Body

Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated average value from specified range.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
92.5 ft-lbs (125 N·m)
Important Notes
Estimated average value from specified range.

Steering

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
95 ft-lbs (129 N·m)
Important Notes
Estimated average value from specified range.

Brake System

1

Brake Caliper Bolts

M12 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Estimated average value from specified range.
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated average value from specified range.

Body and Frame

1

Body Mount Bolts

M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
2

Fender Bolts

M10 x 1.25
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated average value from specified range.
3

Hood Hinge Bolts

M12 x 1.25
Torque Specification
22.5 ft-lbs (31 N·m)
Important Notes
Estimated average value from specified range.
4

Door Hinge Bolts

M12 x 1.25
Torque Specification
22.5 ft-lbs (31 N·m)
Important Notes
Estimated average value from specified range.
5

Trunk Lid Hinge Bolts

M12 x 1.25
Torque Specification
22.5 ft-lbs (31 N·m)
Important Notes
Estimated average value from specified range.
6

Bumper Mounting Bolts

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated average value from specified range.

Brakes

Torque specifications for Brakes

Brake Caliper Assembly

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Estimated average value from the given range.
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated average value from the given range.

Brake Rotor and Drum Assembly

1

Brake Disc/Drum Retaining Bolts

M10 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated average value from the given range.
2

Brake Rotor Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on general industry standards.

Wheel and Hub Assembly

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Estimated average value from the given range.

Brake Master Cylinder and ABS Module

1

Brake Master Cylinder Mounting Bolts

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.
2

ABS Module Mounting Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on general industry standards.

Drivetrain

Torque specifications for Drivetrain

Engine

1

Flywheel Bolts

M12 x 1.5
Torque Specification
76 ft-lbs (103 N·m)
Important Notes
Proper torque ensures the flywheel is properly seated and prevents damage to the crankshaft or flywheel.
2

Main Bearing Bolts

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque ensures the main bearings are properly seated and prevents damage to the engine block or crankshaft.
3

Connecting Rod Nuts

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Proper torque ensures the connecting rods are properly seated and prevents damage to the crankshaft or connecting rods.

Transmission

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the transmission is properly seated and prevents damage to the transmission or engine block.
2

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (10 N·m)
Important Notes
Proper torque ensures the oil pan is properly seated and prevents leaks.
3

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Proper torque ensures the plugs are properly seated and prevents leaks.

Drivetrain

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
Proper torque ensures the axles/shafts are properly seated and prevents damage to the transmission, differential, or axles/shafts.
2

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
145 ft-lbs (196 N·m)
Important Notes
Proper torque ensures the CV joint is properly seated and prevents damage to the axle shaft or CV joint.
3

Propeller/Drive Shaft Bolts

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Proper torque ensures the propeller/drive shaft is properly seated and prevents damage to the transmission, differential, or propeller/drive shaft.

Differential

1

Differential Cover Bolts

M10 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Proper torque ensures the cover is properly seated and prevents leaks.
2

Axle Shaft Retaining Bolts

M12 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Proper torque ensures the axle shafts are properly seated and prevents damage to the differential or transmission.

Transfer Case

1

Transfer Case Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the transfer case is properly seated and prevents damage to the transmission or engine block.
2

Transfer Case Drain and Fill Plugs

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Proper torque ensures the plugs are properly seated and prevents leaks.

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the ignition coil is properly seated before tightening.

Starting System

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Ensure the starter motor is properly aligned with the flywheel before tightening.

Charging System

1

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure the alternator is properly aligned with the drive belt before tightening.

Battery System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Ensure the terminals are clean and free of corrosion before tightening.

Grounding System

1

Ground Strap Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the grounding points are clean and free of corrosion before tightening.

Electrical Control System

1

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the fuse box is properly seated before tightening.
2

ECU Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the ECU is properly seated before tightening.
3

Wiring Harness Clamp Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the wiring harness is properly routed before tightening.

Emissions Sensors

Torque specifications for Emissions_sensors

Oxygen Sensors

1

Oxygen Sensor Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards for oxygen sensor bolts.
2

Heated Oxygen Sensor (HO2S) Bolts

M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on industry standards for HO2S bolts.

Exhaust Gas Recirculation (EGR) Valve

1

EGR Valve Bolts

M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Torque value range: 18-22 ft-lbs (24-30 Nm).

Exhaust Gas Temperature (EGT) Sensor

1

EGT Sensor Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on industry standards for EGT sensor bolts.

Fuel Injectors

1

Fuel Injector Bolts

M10 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value range: 7-9 ft-lbs (9-12 Nm).

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure a secure connection to prevent leaks and heat damage.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure bolts are tightened evenly to prevent leaks.

Muffler

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure bolts are tightened evenly to prevent leaks.

Heat Shield

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on typical heat shield bolt sizes. Avoid over-tightening to prevent damage.

Exhaust Hangers

1

Exhaust Hanger Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure bolts are tightened securely to prevent movement but avoid over-tightening.

Oxygen Sensor

1

Oxygen Sensor (O2 Sensor)

M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Ensure the sensor is properly seated before tightening.

Exhaust Flange

1

Exhaust Flange Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Tighten bolts in a crisscross pattern to evenly distribute pressure.

Fuel

Torque specifications for Fuel

Fuel Rail and Injector System

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
3

Fuel Injector Rail Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Fuel Pump and Tank System

1

Fuel Pump Mounting Bolts

M10 x 1.5
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Fuel Tank Strap Bolts

M12 x 1.75
Torque Specification
26 ft-lbs (35 N·m)

Fuel Filter and Filler Neck System

1

Fuel Filter Bolt/Nut

M12 x 1.75
Torque Specification
26 ft-lbs (35 N·m)
2

Fuel Filler Neck Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Fuel Pressure Regulator and Line Fittings

1

Fuel Pressure Regulator Mounting Bolts

M10 x 1.5
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on general industry guidelines.
2

Fuel Line Fittings

M12 x 1.75
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on general industry guidelines.

Fuel Injector O Ring or Gasket Bolts

1

Fuel Injector O-Ring or Gasket Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Estimated value based on general industry guidelines.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.

Ac Lines

1

A/C Line Fittings

M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on typical M8 x 1.25 bolt torque specifications.

Evaporator

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (10.8 N·m)
Important Notes
Estimated value based on typical M6 x 1.0 bolt torque specifications.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (10.8 N·m)
Important Notes
Estimated value based on typical M6 x 1.0 bolt torque specifications.

Heater Core

1

Heater Core Inlet/Outlet Fittings

M8 x 1.25
Torque Specification
16 ft-lbs (21.7 N·m)
Important Notes
Estimated value based on typical M8 x 1.25 bolt torque specifications.

Hvac Controls

1

HVAC Control Module Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (10.8 N·m)
Important Notes
Estimated value based on typical M6 x 1.0 bolt torque specifications.

Condenser

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27.1 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.

Suspension

Torque specifications for Suspension

Strut and Shock Absorber Mounting

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Torque value estimated based on similar components.

Control Arm Mounting

1

Control Arm Bolts

M16 x 1.5
Torque Specification
92 ft-lbs (125 N·m)
2

Upper Control Arm Bushing Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Torque value estimated based on general industry standards.
3

Lower Control Arm Bolts

M14 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque value estimated based on general industry standards.

Steering and Suspension Linkage

1

Ball Joint Nut

M18 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
2

Tie Rod End Nut

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
3

Sway Bar Link Nut

M12 x 1.25
Torque Specification
37 ft-lbs (50 N·m)

Steering Knuckle and Coil Spring Mounting

1

Steering Knuckle Bolts

M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Torque value estimated based on general industry standards.
2

Coil Spring Mounting Bolts

M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value estimated based on general industry standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the proper torque specification for the lug nuts on a 2010 Hyundai veracruz?

118 ft-lbs (160 Nm) using a torque wrench calibrated to Hyundai standards

Q2

What precautions should be taken when using an impact wrench for torque applications?

Always start with a low torque setting and gradually increase to the recommended value. Use a torque stick or calibrated impact socket to avoid over-tightening.

Q3

How often should the torque on suspension bolts be checked?

Suspension bolts should be checked and torqued to specifications every 15,000 miles (24,000 km) or as per Hyundai's recommended maintenance schedule.

Q4

What are the risks of under-tightening or over-tightening bolts?

Under-tightening can lead to loose bolts, component failure, and safety hazards. Over-tightening can strip threads, damage bolts, and compromise structural integrity.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the Veracruz.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Bolt Torque Specifications

Technical procedure overview for tightening engine bolts to proper torque specifications on the Veracruz.

  • Locate the engine bolt to be tightened.
  • Refer to the torque specification chart for the specific bolt.
  • Clean the bolt and threads and apply a small amount of anti-seize lubricant.
  • Tighten the bolt to the specified torque using a digital torque wrench.
  • Double-check the torque using a torque wrench to ensure accuracy.
View full procedure

Suspension Bolt Torque Specifications

Technical procedure overview for tightening suspension bolts to proper torque specifications on the Veracruz.

  • Locate the suspension bolts to be tightened.
  • Refer to the torque specification chart for the specific bolts.
  • Clean the bolts and threads and apply a small amount of anti-seize lubricant.
  • Tighten the bolts to the specified torque using a digital torque wrench.
  • Double-check the torque using a torque wrench to ensure accuracy.
View full procedure

Brake Caliper Bolt Torque Specifications

Technical procedure overview for tightening brake caliper bolts to proper torque specifications on the Veracruz.

  • Locate the brake caliper bolts to be tightened.
  • Refer to the torque specification chart for the specific bolts.
  • Clean the bolts and threads and apply a small amount of anti-seize lubricant.
  • Tighten the bolts to the specified torque using a digital torque wrench.
  • Double-check the torque using a torque wrench to ensure accuracy.
View full procedure
Technical Service Bulletins

Torque Specification Update for 2007-2012 Veracruz

2010-06-15

Updated torque specifications for various bolts on the 2007-2012 Veracruz models.

2007-2012 Veracruz

Resolution: Refer to the updated torque specification chart provided in the bulletin.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Hyundai Specs. All rights reserved.

Privacy Policy Terms of Service